John Deere 1250

John Deere 1250The John Deere 1250 is a 2WD or 4WD compact utility tractor manufactured by Yanmar for distributor John Deere in Japan from 1982 to 1989. The John Deere 1250 is equipped with a 2.3 L (142.7 cu·in) three-cylinder diesel engine and a sliding gear transmission with 9 forward and 3 reverse gears.

The John Deere 1250 compact utility tractor used the Yanmar 3T95 engine. It is a 2.3 L, 2,338 cm2, (142.7 cu·in) three-cylinder natural aspirated diesel engine with 95.0 mm (3.74 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 18.0:1. This engine produced 44.6 PS (32.8 kW; 44.0 HP) at 2,500 rpm of output power.

The JD 1250 is equipped with power assist steering, differential hydraulic wet disc brakes, two-post ROPS, and 65.0 liters (17.2 US gal.; 14.3 Imp. gal) fuel tank. This tractor could be equipped with the John Deere 100 loader.

John Deere 1250 Specifications

General Specifications
Model John Deere 1250
Length 3,410 mm (134.3 in)
Width 1,650 mm (65 in)
Height 1,420 mm (55.9 in)
Ground clearance 440 mm (17.3 in)
Weight 2,310 kg (5,093 lbs)
Fuel tank capacity 65.0 liters (17.2 US gal.; 14.3 Imp. gal)
Battery 12V
Cabin type Two-post ROPS
Engine
Engine model Yanmar 3T95
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 2.3 L, 2,338 cm2, (142.7 cu·in)
Bore and stroke 95.0 mm X 110.0 mm (3.74 in X 4.33 in)
Compression ratio 18.0:1
Horsepower 44.6 PS (32.8 kW; 44.0 HP) at 2,500 rpm
Starter Electric
Oil capacity: 10.6 L (11.2 US. qt, 9.3 Imp. qt.)
Coolant capacity: 7.9 L (8.3 US. qt, 7 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power assist
Brakes Differential hydraulic wet disc
Final drive Inboard planetary
Transmission model
Transmission type Sliding gear
Gears 9 forward and 3 reverse
Speed Forward: 24.8 kmh (15.4 mph) Reverse: 12.7 (7.9 mph)
Tires
Front tires Ag: 9.5-24
Rear tires Ag: 14.9-28
Three-Point Hitch
Caterogy II/I
Control type Center-link draft sensing with position and contro
Lift capacity (at 610 mm /24 in) 1,015 kg (2,240 lbs)
PTO (Power take-off shaft)
Rear PTO type Continuous
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Valves 0 to 2
Pump flow 11.2 gpm (42.4 lpm)
Steering flow 4.7 gpm (17.8 lpm)
Total flow 15.9 gpm (60.2 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*