John Deere 210C

John Deere 210CThe John Deere 210C is a 2WD or 4WD backhoe loader tractor manufactured by John Deere from 1986 to 1995. The John Deere 210C is equipped with a 3.9 L (239.0 cu·in) four-cylinder diesel engine and a power shuttle transmission with 4 forward and 4 reverse gears.

The JD 210C backhoe loader tractor used the John Deere 4-239D engine. It is a 3.9 L, 3,916 cm2, (239.0 cu·in) four-cylinder natural aspirated diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 17.8:1. This engine produced 58.9 PS (43.3 kW; 58.0 HP) at 2,200 rpm of output power.

The John Deere 210C is equipped with power steering, differential hydraulic wet disc brakes, four-post ROPS/FOPS or Cab (optioanl) and 98.4 liters (26 US gal.; 21.6 Imp. gal) fuel tank.

John Deere 210C Specifications

General Specifications
Model John Deere 210C
Length 7,010 mm (276 in)
Width 1,900 mm (74.8 in)
Height ROPS: 2,570 mm (101.2 in)
Wheel base 2WD: 2,100 mm (82.7 in)
4WD: 2,110 mm (83.1 in)
Ground clearance 270 mm (10.6 in)
Weight 4,760 kg (10,494 lbs)
Fuel tank capacity 98.4 liters (26 US gal.; 21.6 Imp. gal)
Battery 12V
Cabin type Four-post ROPS/FOPS or Cab (optioanl)
Engine
Engine model John Deere 4-239D
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 3.9 L, 3,916 cm2, (239.0 cu·in)
Bore and stroke 106.0 mm X 110.0 mm (4.17 in X 4.33 in)
Compression ratio 17.8:1
Horsepower 58.9 PS (43.3 kW; 58.0 HP) at 2,200 rpm
Torque 214.2 N·m (21.8 kg·m, 157.9 ft·lb) at 1,200 rpm
Starter Electric
Oil capacity: 8.5 L (9 US. qt, 7.5 Imp. qt.)
Coolant capacity: 16.1 L (17 US. qt, 14.2 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power
Brakes Differential hydraulic wet disc
Final drive Inboard planetary
Transmission model
Transmission type Power shuttle
Gears 4 forward and 4 reverse
Speed Forward: 35.2 kmh (21.9 mph) Reverse: 36.0 kmh (22.4 mph)
Tires
Front tires Industrial: 7.50-16 (2WD), 12.00-16.5 (4WD)
Rear tires Industrial: 14.9-24 (2WD), 16.9-24 (4WD)
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 30.3 L (8 US. gal, 6.7 Imp. gal.)
Pressure 2500 psi (172.4 bar)
Steering flow 4.3 gpm (16.3 lpm)
Total flow 24.0 gpm (90.8 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*