John Deere 210LE

John Deere 210LEThe John Deere 210LE is a 4WD industrial tractor manufactured by John Deere in from 1997 to 2007. The John Deere 210LE is equipped with a 4.5 L (276.0 cu·in) four-cylinder diesel engine and one of two transmissions: a power shuttle transmission with 4 forward and 4 reverse gears or a full power shift transmission with 4 forward and 3 reverse gears.

The John Deere 210LE industrial tractor used the John Deere 4045D engine. It is a 4.5 L, 4,523 cm2, (276.0 cu·in) four-cylinder turbocharged diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 79.2 PS (58.2 kW; 78.0 HP) at 2,200 rpm of output power. This tractor could be equipped with the John Deere 4045T engine, with the same displacement and 81.2 PS (59.7 KW; 80.0 HP) at 2,200 of horsepower.

The JD 210LE is equipped with power steering, hydraulic wet disc brakes, two-post ROPS/FOPS or Cab (optional), and 98.4 liters (26 US gal.; 21.6 Imp. gal) fuel tank.

John Deere 210LE Specifications

General Specifications
Model John Deere 210LE
Length 5,230 mm (205.9 in)
Width 2,130 mm (83.9 in)
Height 2,470 mm (97.2 in)
Wheel base 2,110 mm (83.1 in)
Weight 4,140 kg (9,127 lbs)
Fuel tank capacity 98.4 liters (26 US gal.; 21.6 Imp. gal)
Battery One or two 12V, CCA: 925A
Cabin type Two-post ROPS/FOPS or Cab (optional)
Engine
Engine model John Deere 4045D
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 4.5 L, 4,523 cm2, (276.0 cu·in)
Bore and stroke 106.0 mm X 127.0 mm (4.17 in X 5 in)
Horsepower 79.2 PS (58.2 kW; 78 HP) at 2,200 rpm
Starter Electric
Oil type 8.5
Oil capacity: 16.3 L (17.2 US. qt, 14.3 Imp. qt.)
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Power
Brakes Hydraulic wet disc
Final drive Inboard planetary
Transmission model
Transmission type Power shuttle
Gears 4 forward and 4 reverse
Speed Forward: 33.0 kmh (20.5 mph) Reverse: 33.0 (20.5 mph)
Transmission oil capacity 14.2 L (3.8 US. gal, 3.1 Imp. gal.)
Transmission model
Transmission type Full power shift
Gears 4 forward and 3 reverse
Speed Forward: 33.0 kmh (20.5 mph) Reverse: 25.9 (16.1 mph)
Tires
Front tires Industrial: 12-16.5
Rear tires Industrial: 16.9-24
Three-Point Hitch
Caterogy II
Control type
Lift capacity (at ends) 3,115 kg (6,870 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 54.5 L (57.59 US. qt, 47.95 Imp. qt.)
Pressure 2750 psi (189.6 bar)
Pump flow 25.0 gpm (94.6 lpm)