John Deere 2120

John Deere 2120The John Deere 2120 is a 2WD tractor manufactured by John Deere in Mannheim, Baden-Württemberg, Germany and Mexico from 1969 to 1972. The John Deere 2120 is equipped with a 3.6 L (219.0 cu·in) four-cylinder diesel engine and one of two transmissions: a gear type transmission with 8 forward and 4 reverse gears or a two-speed power shift transmission with 16 forward and 8 reverse gears.

The JD 2120 row-crop tractor used the John Deere engine. It is a 3.6 L, 3,589 cm2, (219.0 cu·in) four-cylinder natural aspirated diesel engine with 102.0 mm (4.02 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. This engine produced 69 PS (50.7 kW; 68.0 HP) at 2,500 rpm of output power and 69.6 N·m (7.1 kg·m, 51.3 ft·lb) at 1,500 rpm of torque.

The John Deere 2120 is equipped with power steering, open operator station or cab (optional) and 73.8 liters (19.5 US gal.; 16.2 Imp. gal) fuel tank.

John Deere 2120 Specifications

General Specifications
Model John Deere 2120
Length 3,600 mm (141.7 in)
Width
Height 2,450 mm (96.5 in)
Wheel base 2,180 mm (85.8 in)
Weight 3,000 kg (6,614 lbs)
Fuel tank capacity 73.8 liters (19.5 US gal.; 16.2 Imp. gal)
Battery
Cabin type Open operator station or cab (optional)
Engine
Engine model John Deere
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 3.6 L, 3,589 cm2, (219.0 cu·in)
Bore and stroke 102.0 mm X 110.0 mm (4.02 in X 4.33 in)
Horsepower 69 PS (50.7 kW; 68.0 HP) at 2,500 rpm
Torque 69.6 N·m (7.1 kg·m, 51.3 ft·lb) at 1,500 rpm
Starter Electric
Transmission and chassis
Chassis 4×2 2WD
Steering type Power
Brakes
Final drive Planetary
Differential lock Mechanical rear
Transmission model
Transmission type Gear type
Gears 8 forward and 4 reverse
Speed Forward: 27.4 kmh (17 mph) Reverse: 8.1 kmh (5 mph)
Transmission model Hi-Lo
Transmission type Two-speed power shift
Gears 16 forward and 8 reverse
Speed Forward: 27.4 kmh (17 mph) Reverse: 8.1 kmh (5 mph)
Tires
Front tires Ag: 7.50-16
Rear tires Ag: 15.5-38
Three-Point Hitch
Category II
Control type
Lift capacity 2,040 kg (4,498 lbs)
PTO (Power take-off shaft)
Rear PTO type
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Closed center
Pump flow 12.4 gpm (46.9 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*