The John Deere 2155 is a 2WD or 4WD utility tractor from the 55 Utility series. This tractor was manufactured by John Deere in Mannheim, Baden-Württemberg, Germany from 1987 to 1992. The John Deere 2155 is equipped with a 2.9 L (179.0 cu·in) three-cylinder diesel engine and one of three transmissions: a non-synchronized transmission with 8 forward and 4 reverse gears and dry disc clutch, a partially synchronized transmission with 8 forward and 4 reverse gears, a partially synchronized transmission with 16 forward and 8 reverse gears and dry disc clutch or a power shuttle transmission with 8 forward and 8 reverse gears.
The JD 2155 utility tractor used the John Deere engine. It is a 2.9 L, 2,934 cm2, (179.0 cu·in) three-cylinder natural aspirated diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 17.8:1. This engine produced 55.8 PS (41.0 kW; 55 HP) of output power.
The John Deere 2155 is equipped with power steering, differential hydraulic wet disc brakes, Roll-Gard ROPS, and 67.0 liters (17.7 US gal.; 14.7 Imp. gal) fuel tank.
John Deere 2155 Specifications
| General Specifications | |
| Model | John Deere 2155 |
| Length | – |
| Width | – |
| Height | – |
| Wheel base | 2,040 mm (80.3 in) |
| Weight |
2WD with ROPS: 2,210 kg (4,870 lbs) 4WD with ROPS: 2,610 kg (5,755 lbs) |
| Fuel tank capacity | 67.0 liters (17.7 US gal.; 14.7 Imp. gal) |
| Battery | Two 12V, CCA 400A |
| Cabin type | Roll-Gard ROPS |
| Engine | |
| Engine model | John Deere |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 2.9 L, 2,934 cm2, (179.0 cu·in) |
| Bore and stroke | 106.0 mm X 110.0 mm (4.17 in X 4.33 in) |
| Compression ratio | 17.8:1 |
| Horsepower | 55.8 PS (41.0 kW; 55 HP) |
| Starter | Electric |
| Oil capacity: | 6.0 L (6.3 US. qt, 5.3 Imp. qt.) |
| Coolant capacity: | 10.0 L (10.6 US. qt, 8.8 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | Differential hydraulic wet disc |
| Transmission model | John Deere Collar Shift (CST) |
| Transmission type | Non-synchronized with dry disc clutch |
| Gears | 8 forward and 4 reverse |
| Transmission model | John Deere Top-Shaft Synchronized (TSS) |
| Transmission type | Partially synchronized with dry disc clutch |
| Gears | 8 forward and 4 reverse |
| Speed | Forward: 26.4 kmh (16.4 mph) Reverse: 7.9 (4.9 mph) |
| Transmission model | John Deere Top-Shaft Synchronized (TSS) |
| Transmission type | Partially synchronized with dry disc clutch |
| Gears | 16 forward and 8 reverse |
| Transmission model | John Deere Collar Shift Reverser |
| Transmission type | Power shuttle |
| Gears | 8 forward and 8 reverse |
| Tires | |
| Front tires | Ag: 6.50-16 |
| Rear tires | Ag: 13.6-28 |
| Three-Point Hitch | |
| Caterogy | II/I |
| Control type | – |
| Lift capacity (at ends) | 1,130 kg (2,490 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Live or independent |
| Rear PTO speed | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Closed center |
| Hydraulic capacity | 2250 L (2377.55 US. qt, 1979.72 Imp. qt.) |
| Valves | 0 to 3 |
| Total flow | 13.0 gpm (49.2 lpm) |
Be the first to comment