John Deere 310A

John Deere 310AThe John Deere 310A is a 2WD backhoe loader tractor manufactured by John Deere in Dubuque, Iowa, USA from 1975 to 1982. The John Deere 310A is equipped with a 3.6 L (219.0 cu·in) four-cylinder diesel engine and a gear type transmission with 8 forward and 8 reverse gears and dry disc clutch.

The JD 310A backhoe loader tractor used the John Deere engine. It is a 3.6 L, 3,589 cm2, (219.0 cu·in) four-cylinder natural aspirated diesel engine with 102.0 mm (4.02 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 16.2:1. This engine produced 62.8 PS (46.2 kW; 62.0 HP) at 2,500 rpm of output power and 203.4 N·m (20.7 kg·m, 149.9 ft·lb) at 1,300 rpm of torque.

The John Deere 310A is equipped with power steering, four-post FOPS/ROPS or Cab, and 74.0 liters (19.5 US gal.; 16.3 Imp. gal) fuel tank.

John Deere 310A Specifications

General Specifications
Model John Deere 310A
Length 7,180 mm (282.7 in)
Width 2,080 mm (81.9 in)
Height 3,420 mm (134.6 in)
Wheel base –
Weight 6,132 kg (13,519 lbs)
Fuel tank capacity 74.0 liters (19.5 US gal.; 16.3 Imp. gal)
Battery Two 6V
Cabin type Four-post FOPS/ROPS or Cab
Engine
Engine model John Deere
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 3.6 L, 3,589 cm2, (219.0 cu·in)
Bore and stroke 102.0 mm X 110.0 mm (4.02 in X 4.33 in)
Compression ratio 16.2:1
Horsepower 62.8 PS (46.2 kW; 62.0 HP) at 2,500 rpm
Torque 203.4 N·m (20.7 kg·m, 149.9 ft·lb) at 1,300 rpm
Starter Electric
Oil capacity: 8.5 L (9 US. qt, 7.5 Imp. qt.)
Coolant capacity: 11.4 L (12 US. qt, 10 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD
Steering type Power
Brakes –
Final drive Inboard planetary
Differential lock Mechanical rear
Transmission model –
Transmission type Gear type with dry disc clutch
Gears 8 forward and 8 reverse
Speed Forward: 26.4 kmh (16.4 mph) Reverse: 42.5 (26.4 mph)
Transmission oil capacity 37.9 L (10 US. gal, 8.3 Imp. gal.)
Tires
Front tires Ag: 7.50-16, 11L-15
Rear tires Ag: 16.9-24, 19.5L-24
Hydraulic system
Hydraulic type Closed center
Hydraulic capacity 77.6 L (82 US. qt, 68.28 Imp. qt.)
Pressure 2350 psi (162 bar)
Pump flow 28.0 gpm (106 lpm)

Be the first to comment

Leave a Reply

Your email address will not be published.


*