John Deere 3255

John Deere 3255The John Deere 3255 is a 4WD utility tractor manufactured by John Deere in Mannheim, Baden-Württemberg, Germany from 1991 to 1993. The John Deere 3255 is equipped with a 5.9 L (359.0 cu·in) six-cylinder diesel engine and a tss high-low transmission with 16 forward and 8 reverse gears.

The JD 3255 utility tractor used the John Deere engine. It is a 5.9 L, 5,883 cm2, (359.0 cu·in) six-cylinder turbocharged diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. This engine produced 101.5 PS (74.6 kW; 100.0 HP) at 2,400 rpm of PTO output power.

The JD 3255 is equipped with power steering, hydraulic wet disc brakes, four-post ROPS or Sound-Gard body and cab (optional) and 170.0 liters (44.9 US gal.; 37.4 Imp. gal) fuel tank.

John Deere 3255 Specifications

General Specifications
Model John Deere 3255
Length
Width
Height
Wheel base 2,580 mm (101.6 in)
Ground clearance (front axle) 530 mm (20.9 in)
Weight (shipping) ROPS: 4,635 kg (10,218 lbs)
Cab: 4,800 kg (10,582 lbs)
Fuel tank capacity 170.0 liters (44.9 US gal.; 37.4 Imp. gal)
Battery 12V
Cabin type Four-post ROPS or Sound-Gard body and cab (optional)
Engine
Engine model John Deere
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 5.9 L, 5,883 cm2, (359.0 cu·in)
Bore and stroke 106.0 mm X 110.0 mm (4.17 in X 4.33 in)
Horsepower 101.5 PS (74.6 kW; 100 HP) at 2,400 rpm
Starter Electric
Coolant capacity: 17.0 L (18 US. qt, 15 Imp. qt.)
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Power
Brakes Hydraulic wet disc
Final drive Inboard planetary
Differential lock Rear lock (standard), limited-slip front differential
Transmission model
Transmission type TSS High-Low
Gears 16 forward and 8 reverse
Tires
Front tires Ag: 13.6-28
Rear tires Ag: 18.4-38
Three-Point Hitch
Category II
Control type Lower-link draft sensing
Lift capacity (at 24 in/610 mm) 3,160 kg (6,965 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540/1000 rpm
Hydraulic system
Hydraulic type Closed center
Hydraulic capacity 50.0 L (13.2 US. gal, 11 Imp. gal.)
Valves 2 or 3
Pump flow 22.0 gpm (83.3 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*