John Deere 3310

John Deere 3310The John Deere 3310 is a 4WD utility tractor manufactured by Renault for John Deere in Le Mans, France from 1998 to 2002. The John Deere 3310 is equipped with a 4.5 L four-cylinder diesel engine and one of two transmission variants.

The John Deere 3310 utility tractor used the John Deere engine. It is a 4.5 L, 4,523 cm2, (276.0 cu·in) four-cylinder natural aspirated diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 127.0 mm (5.0 in) of the piston stroke. This engine produced 76 PS (55.9 kW; 75.0 HP) at 2050 rpm of output power.

The John Deere 3310 is equipped with hydrostatic power steering, wet disc brakes, cab with heat and 115.0 liters (30.4 US gal.; 25.3 Imp. gal) fuel tank.

John Deere 3310 Specifications

General Specifications
Model John Deere 3310
Length 4,060 mm (159.8 in)
Width –
Height 2,540 mm (100 in)
Wheel base 2,400 mm (94.5 in)
Weight 3,425 kg (7550.8 lbs)
Fuel tank capacity 115.0 liters (30.4 US gal.; 25.3 Imp. gal)
Battery 12V
Cabin type Cab with heat
Engine
Engine model John Deere
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 4.5 L, 4,523 cm2, (276.0 cu·in)
Bore and stroke 106.0 mm X 127.0 mm (4.17 in X 5 in)
Horsepower 76 PS (55.9 kW; 75 HP) at 2050 rpm
Starter Electric
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Wet disc
Transmission model –
Transmission type Synchronized
Gears 20 forward and 20 reverse
Transmission model TwinShift
Transmission type Power shift
Gears 20 forward and 20 reverse
Tires
Front tires Ag: 13.6R24
Rear tires Ag: 16.9R34
Three-Point Hitch
Caterogy II
Control type Position and draft control
Lift capacity (at ends) 4,030 kg (8,890 lbs)
5,110 kg (11,270 lbs)
PTO (Power take-off shaft)
Rear PTO type –
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type –
Pump flow 13.7 gpm (51.9 lpm)

Be the first to comment

Leave a Reply

Your email address will not be published.


*