The John Deere 3320 is a 4WD compact utility tractor from the 3000 Twenty series. This tractor was manufactured by John Deere in Augusta, Georgia, USA from 2005 to 2013. The JD 3320 is equipped with a 1.6 L three-cylinder diesel engine and one of three transmissions: PowrReverser, Sauer-Danfoss eHydro or eHydro AutoHST.
The John Deere 3320 compact utility tractor used the Yanmar 3TNV88 engine. It is a 1.6 L, 1,624 cm2, (99.1 cu·in) three-cylinder natural aspirated diesel engine with 88.0 mm (3.46 in) of the cylinder bore and 90.0 mm (3.54 in) of the piston stroke. The compression ratio rating is 18.5:1. This engine produced 32.9 PS (24.2 kW; 32.5 HP) at 2,600 rpm of maximum output power and 100.2 N·m (10.2 kg·m, 73.8 ft·lb) at 1,560 rpm of torque.
The JD 3320 is equipped with power steering, wet disc brakes, two-post foldable ROPS or Cab (optional) and 51.1 liters (13.5 US gal.; 11.2 Imp. gal) fuel tank for ROPS version and 44.7 liters (11.8 US gal, 9.8 Imp. gal) for Cab version.
Following attachments are available for the John Deere 3320 compact utility tractor:
- Mid-mount John Deere 60 in (1,520 mm) mower deck with 3-blades
- John Deere 300X loader
- John Deere 300CX loader
- John Deere 47 backhoe
John Deere 3320 Specifications
| General Specifications | |
| Model | John Deere 3320 |
| Length | 3,050 mm (120.1 in) |
| Width | 1,330 mm (52.4 in) |
| Height |
ROPS: 2,360 mm (92.9 in) Cab: 2,270 mm (89.4 in) |
| Wheel base | 1,720 mm (67.7 in) |
| Weight |
ROPS: 1,315 kg (2,900 lbs) Cab: 1,620 kg (3,570 lbs) |
| Fuel tank capacity |
ROPS: 51.1 liters (13.5 US gal.; 11.2 Imp. gal) Cab: 44.7 liters (11.8 US gal, 9.8 Imp. gal) |
| Battery | 12V, CCA 500A |
| Cabin type | Two-post foldable ROPS or Cab (optional). |
| Engine | |
| Engine model | Yanmar 3TNV88 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 1.6 L, 1,624 cm2, (99.1 cu·in) |
| Bore and stroke | 88.0 mm X 90.0 mm (3.46 in X 3.54 in) |
| Compression ratio | 18.5:1 |
| Horsepower | 32.9 PS (24.2 kW; 32.5 HP) at 2,600 rpm |
| Torque | 100.2 N·m (10.2 kg·m, 73.8 ft·lb) at 1,560 rpm |
| Starter | Electric |
| Oil capacity: | 4.8 L (5.1 US. qt, 4.2 Imp. qt.) |
| Coolant capacity: |
ROPS: 5.3 L (5.6 US. qt, 4.7 Imp. qt.) Cab: 7.0 L (7.4 US qt, 6.2 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | Wet disc |
| Transmission model | PowrReverser |
| Transmission type | Partially synchronized with power shuttle |
| Gears | 12 forward and 12 reverse |
| Speed | Forward: 26.4 kmh (16.4 mph) Reverse: 26.4 (16.4 mph) |
| Transmission model | Sauer-Danfoss eHydro |
| Transmission type | Hydrostatic |
| Gears | Infinite (3-range) forward and reverse |
| Speed | Forward: 30.6 kmh (19 mph) Reverse: 30.6 (19 mph) |
| Transmission model | eHydro AutoHST |
| Transmission type | Hydrostatic |
| Gears | Infinite (3-range) forward and reverse |
| Tires | |
| Front tires |
Ag: 7-14 Lawn/turf: 27×8.5-15, 25×10.5LL-15 Industrial: 25×8.5-14, 27×8.5-15 |
| Rear tires |
Ag: 11.2-24 Lawn/turf: 41×14-20, 41x18LL-16.1 Industrial: 15-19.5, 43×16-20 |
| Three-Point Hitch | |
| Caterogy | I |
| Control type | – |
| Lift capacity (at ends) | 1150 kg (2536 lbs) |
| PTO (Power take-off shaft) | |
| Middle PTO type | Optional |
| Middle PTO spped | 2,100 rpm |
| Rear PTO type | Independent |
| Rear PTO spped | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Hydraulic capacity |
Hydro: 25.7 L (27.2 US. qt, 22.6 Imp. qt.) Gear: 23.8 L (25.1 US. qt, 20.9 Imp. qt.) |
| Valves | 5 |
| Pump flow | 8.6 gpm (32.6 lpm) |
| Steering flow | 5.3 gpm (20.1 lpm) |
| Total flow | 13.9 gpm (52.6 lpm) |