The John Deere 4044M is a 4WD compact utility tractor from the 4M series. This tractor has been manufactured by the John Deere in Augusta, Georgia, USA since 2014. The JD 4044M is equipped with a 2.2 L four-cylinder diesel engine and one of two transmissions: power shuttle transmission with wet disc clutch and 12 forward and 12 reverse gears or hydrostatic transmission with infinite forward and reverse gears.
The John Deere 4044M compact utility tractor used the Yanmar 4TNV88 engine. It is a 2.2 L, 2,189 cm2, (133.6 cu·in) four-cylinder turbocharged diesel engine with 88.0 mm (3.46 in) of the cylinder bore and 90.0 mm (3.54 in) of the piston stroke. This engine produced 43.7 PS (32.1 kW; 43.0 HP) at 2,600 rpm of maximum output power.
The John Deere 4044M is equipped with power steering, hydraulic wet disc brakes, two-post folding ROPS and 49.2 liters (13.0 US gal.; 10.8 Imp. gal) fuel tank.
Following attachments are available for the JD 4044M compact utility tractor:
- John Deere D170 loader
- John Deere H180 loader
- John Deere 400E loader
- John Deere 485A backhoe
John Deere 4044M Specifications
| General Specifications | |
| Model | John Deere 4044M |
| Length | 3,310 mm (130.3 in) |
| Width | – |
| Height | 2,540 mm (100 in) |
| Wheel base | 1,850 mm (72.8 in) |
| Weight | 1,710 kg (3,770 lbs) |
| Fuel tank capacity | 49.2 liters (13 US gal.; 10.8 Imp. gal) |
| Battery | 12V, CCA 770A |
| Cabin type | Two-post folding ROPS |
| Engine | |
| Engine model | Yanmar 4TNV88 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Diesel |
| Displacement | 2.2 L, 2,189 cm2, (133.6 cu·in) |
| Bore and stroke | 88.0 mm X 90.0 mm (3.46 in X 3.54 in) |
| Horsepower | 43.7 PS (32.1 kW; 43.0 HP) at 2,600 rpm |
| Starter | Electric |
| Oil capacity: | 5.4 L (5.7 US. qt, 4.8 Imp. qt.) |
| Coolant capacity: | 6.0 L (6.3 US. qt, 5.3 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | Hydraulic wet disc |
| Final drive | Planetary |
| Differential lock | Mechanical rear |
| Transmission model | PowrReverser |
| Transmission type | Power shuttle with wet disc clutch |
| Gears | 12 forward and 12 reverse |
| Speed | Forward: 29.9 kmh (18.6 mph) Reverse: (0 mph) |
| Transmission model | eHydro |
| Transmission type | Hydrostatic |
| Gears | Infinite forward and reverse |
| Speed | Forward: 32.8 kmh (20.4 mph) Reverse: (0 mph) |
| Tires | |
| Front tires |
Ag: 8.00-16 Lawn/turf: 27×10.50-15 |
| Rear tires |
Ag: 13.6-28 Lawn/turf: 44×18-20 |
| Three-Point Hitch | |
| Caterogy | I |
| Control type | Position control |
| Lift capacity (at ends) | 1,420 kg (3,130 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO spped | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Hydraulic capacity | 47.3 L (49.98 US. qt, 41.62 Imp. qt.) |
| Pressure | 2,500 psi (172 bar) |
| Pump flow | 10.2 gpm (38.6 lpm) |
| Steering flow | 5.7 gpm (21.6 lpm) |
| Total flow | 15.9 gpm (60.2 lpm) |
Be the first to comment