John Deere 4105

John Deere 4105The John Deere 4105 is a 4WD compact utility tractor manufactured by the John Deere in Augusta, Georgia, USA from 2008 to 2014. The JD 4105 is equipped with a 1.5 L three-cylinder turbocharged diesel engine and hydrostatic transmission with infinite (2-range) forward and reverse gears.

The John Deere 4105 compact utility tractor used the Yanmar 3TNV84T engine. It is a 1.5 L, 1,499 cm2, (91.5 cu·in) three-cylinder turbocharged diesel engine with 84.0 mm (3.31 in) of the cylinder bore and 90.0 mm (3.54 in) of the piston stroke. The compression ratio rating is 19.0:1. This engine produced 41.6 PS (30.6 kW; 41.0 HP) at 2,800 rpm of horsepower and 124.5 N·m (12.7 kg·m, 91.8 ft·lb) at 1,900 rpm of torque.

The John Deere 4105 is equipped with power steering, wet disc brakes, open operator station with two-post foldable ROPS and 43.5 liters (11.5 US gal.; 9.6 Imp. gal) fuel tank. The JD 4105 could be equipped with John Deere 300CX loader.

John Deere 4105 Specifications

General Specifications
Model John Deere 4105
Length 3,050 mm (120.1 in)
Width 1,670 mm (65.7 in)
Height 2,220 mm (87.4 in)
Wheel base 1,720 mm (67.7 in)
Weight (max) 3,265 kg (7198.1 lbs)
Fuel tank capacity 43.5 liters (11.5 US gal.; 9.6 Imp. gal)
Battery 12V, CCA 500A
Cabin type Open operator station with two-post foldable ROPS
Engine
Engine model Yanmar 3TNV84T
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 1.5 L, 1,499 cm2, (91.5 cu·in)
Bore and stroke 84.0 mm X 90.0 mm (3.31 in X 3.54 in)
Compression ratio 19.0:1
Horsepower 41.6 PS (30.6 kW; 41.0 HP) at 2,800 rpm
Torque 124.5 N·m (12.7 kg·m, 91.8 ft·lb) at 1,900 rpm
Starter Electric
Oil capacity: 4.3 L (4.5 US. qt, 3.8 Imp. qt.)
Coolant capacity: 5.3 L (5.6 US. qt, 4.7 Imp. qt.)
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Power
Brakes Wet disc
Transmission model
Transmission type Hydrostatic
Gears Infinite (2-range) forward and reverse
Speed Forward: 20.9 kmh (13 mph) Reverse: 20.3 (12.6 mph)
Transmission oil capacity 31.5 L (8.3 US. gal, 6.9 Imp. gal.)
Tires
Front tires Ag: 8-16
Rear tires Ag: 14.9-24
Three-Point Hitch
Caterogy I
Control type
Lift capacity (at ends) 1,150 kg (2,536 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO spped 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 31.5 L (34.0 US. qt, 27.7 Imp. qt.)
Pressure 2,500 psi (172.4 bar)
Valves 3
Pump flow 9.2 gpm (34.8 lpm)
Steering flow 5.7 gpm (21.6 lpm)
Total flow 14.8 gpm (56 lpm)