John Deere 4115

John Deere 4115The John Deere 4115 is a 4WD compact utility tractor from the 4000 Ten Compact series. This tractor was manufactured by Yanmar for John Deere in Japan from 2003 to 2004. The John Deere 4115 is equipped with a 1.2 L three-cylinder diesel engine and hydrostatic transmission with infinite (2-range) forward and reverse gears.

The JD 4115 compact utility tractor used the Yanmar 3TNE78A engine. It is a 1.2 L, 1,204 cm2, (73.5 cu·in) three-cylinder natural aspirated diesel engine with 78.0 mm (3.07 in) of the cylinder bore and 84.0 mm (3.31 in) of the piston stroke. This engine produced 24.3 PS (17.9 kW; 24.0 HP) at 2,650 rpm of output power.

The John Deere 4115 is equipped with power steering, wet disc brakes, open operator station with two-post ROPS and 22.0 liters (5.8 US gal.; 4.8 Imp. gal) fuel tank.

Following attachments are available for the JD 4115 compact utility tractor:

  • Mid-mount John Deere: 60 in (1,520 mm) mower deck
  • Mid-mount John Deere: 72 in (1,820 mm) mower deck with 3-blades
  • John Deere 410 loader

John Deere 4115 Specifications

General Specifications
Model John Deere 4115
Length 2,740 mm (107.9 in)
Width 1,190 mm (46.9 in)
Height 2,050 mm (80.7 in)
Wheel base 1,640 mm (64.6 in)
Weight (operating) 800 kg (1,765 lbs)
Fuel tank capacity 22.0 liters (5.8 US gal.; 4.8 Imp. gal)
Battery 12V, CCA 435A
Cabin type Open operator station with two-post ROPS
Engine
Engine model Yanmar 3TNE78A
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 1.2 L, 1,204 cm2, (73.5 cu·in)
Bore and stroke 78.0 mm X 84.0 mm (3.07 in X 3.31 in)
Horsepower 24.3 PS (17.9 kW; 24.0 HP) at 2,650 rpm
Starter Electric
Oil capacity: 2.4 L (2.5 US. qt, 2.1 Imp. qt.)
Coolant capacity: 2.2 L (2.3 US. qt, 1.9 Imp. qt.)
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Power
Brakes Wet disc
Transmission model
Transmission type Hydrostatic
Gears Infinite (2-range) forward and reverse
Speed Forward: 19.5 kmh (12.1 mph) Reverse: 9.7 (6 mph)
Transmission oil capacity 14.6 L (3.9 US. gal, 3.2 Imp. gal.)
Tires
Front tires Ag: 5.00-12, 7.00-12
Rear tires Ag: 9.5-16, 35×12.00-16
Three-Point Hitch
Caterogy I
Control type
Lift capacity (at 610 mm / 24 in) 520 kg (1147 lbs)
PTO (Power take-off shaft)
Middle PTO type Independent
Middle PTO speed 2,100 rpm
Rear PTO type Independent
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 14.6 L (15.43 US. qt, 12.85 Imp. qt.)
Pump flow 5.1 gpm (19.3 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*