The John Deere 4210 is a 2WD or 4WD compact utility tractor from the 4000 Ten Compact series. This tractor was manufactured by the John Deere in Augusta, Georgia, USA from 2002 to 2004. The JD 4210 is equipped with a 1.3 L three-cylinder diesel engine and one of two transmissionas: partially synchronized transmission with 9 forward and 3 reverse gears or hydrostatic transmission with infinite (3-range) forward and reverse.
The John Deere 4210 compact utility tractor used the Yanmar 3TNE82A engine. It is a 1.3 L, 1,330 cm2, (81.2 cu·in) three-cylinder natural aspirated diesel engine with 82.0 mm (3.23 in) of the cylinder bore and 84.0 mm (3.31 in) of the piston stroke. The compression ratio rating is 18.5:1. This engine produced 27.3 PS (20.1 kW; 27.0 HP) at 2,600 rpm of horsepower.
The John Deere 4210 is equipped with power steering, wet disc brakes, two-post ROPS or foldable ROPS (option) and 38.0 liters (10 US gal.; 8.4 Imp. gal) fuel tank.
Following attachments are available for the JD 4210 compact utility tractor:
- Mid-mount John Deere 60 7-Iron: 60 in (1,520 mm) mower deck
- Mid-mount John Deere: 72 in (1,820 mm) mower deck with 3-blades
- John Deere 420 loader
- John Deere 47 backhoe
John Deere 4210 Specifications
| General Specifications | |
| Model | John Deere 4210 |
| Length | 2,970 mm (116.9 in) |
| Width | 1,340 mm (52.8 in) |
| Height | 2,010 mm (79.1 in) |
| Wheel base | 1,650 mm (65 in) |
| Weight | 2WD: 1,080 kg (2,381 lbs) 4WD: 1,213 kg (2,675 lbs) |
| Fuel tank capacity | 38.0 liters (10 US gal.; 8.4 Imp. gal) |
| Battery | 12V, CCA 500A |
| Cabin type | Two-post ROPS or foldable ROPS (option) |
| Engine | |
| Engine model | Yanmar 3TNE82A |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 1.3 L, 1,330 cm2, (81.2 cu·in) |
| Bore and stroke | 82.0 mm X 84.0 mm (3.23 in X 3.31 in) |
| Compression ratio | 18.5:1 |
| Horsepower | 27.3 PS (20.1 kW; 27.0 HP) at 2,600 rpm |
| Starter | Electric |
| Oil capacity: | 3.8 L (4 US. qt, 3.3 Imp. qt.) |
| Coolant capacity: | 5.3 L (5.6 US. qt, 4.7 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | Wet disc |
| Differential lock | Mechanical |
| Transmission model | SyncShift |
| Transmission type | Partially synchronized |
| Gears | 9 forward and 3 reverse |
| Speed | Forward: 20.4 kmh (12.7 mph) Reverse: 10.1 (6.3 mph) |
| Transmission oil capacity | 23.8 L (6.3 US. gal, 5.2 Imp. gal.) |
| Transmission model | eHydro |
| Transmission type | Hydrostatic |
| Gears | Infinite (3-range) forward and reverse |
| Speed | Forward: 23.8 kmh (14.8 mph) Reverse: 23.8 (14.8 mph) |
| Transmission oil capacity | 25.7 L (6.8 US. gal, 5.7 Imp. gal.) |
| Tires | |
| Front tires | Ag: 4.00-15 (2WD), 7.00-14 (4WD) |
| Rear tires | Ag: 11.2-24 |
| Three-Point Hitch | |
| Caterogy | I |
| Control type | – |
| Lift capacity (at 610mm / 24 in) | 770 kg (1,698 lbs) |
| PTO (Power take-off shaft) | |
| Middle PTO type | Optional |
| Middle PTO spped | 2,100 rpm |
| Rear PTO type | Independent |
| Rear PTO spped | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Hydraulic capacity | SyncShift: 23.8 L (25.15 US. qt, 20.94 Imp. qt.) eHydro: 25.7 L (6.8 US. gal, 5.7 Imp. gal.) |
| Pressure | 2,125 psi (146 bar) |
| Valves | 5 |
| Pump flow | 7.0 gpm (26.5 lpm) |
| Steering flow | 5.3 gpm (20.1 lpm) |
| Total flow | 12.3 gpm (46.6 lpm) |
Be the first to comment