The John Deere 4310 is a 2WD or 4WD compact utility tractor from the 4000 Ten Compact series. This tractor was manufactured by the John Deere in Augusta, Georgia, USA from 2002 to 2004. The John Deere 4310 tractor is equipped with a 1.5 L three-cylinder diesel engine and one of two transmissions: a partially synchronized transmission with 9 forward and 3 reverse gears, a power shuttle transmission with 12 forward and 12 reverse gears or hydrostatic transmission with infinite (3-range) forward and reverse.
The JD 4310 compact utility tractor used the Yanmar 3TNE84 engine. It is a 1.5 L, 1,496 cm2, (91.3 cu·in) three-cylinder natural aspirated diesel engine with 84.0 mm (3.31 in) of the cylinder bore and 90.0 mm (3.54 in) of the piston stroke. This engine produced 31.7 PS (23.3 kW; 31.2 HP) at 2,600 rpm of maximum output power.
The John Deere 4310 is equipped with power steering, wet disc brakes, two-post ROPS or foldable ROPS (optional) and 37.9 liters (10 US gal.; 8.3 Imp. gal) fuel tank.
Following attachments are available for the John Deere 4310 compact utility tractor:
- Mid-mount John Deere 60 in (1,520 mm) mower deck with 3-blades
- Mid-mount John Deere 72 in (1,820 mm) mower deck with 3-blades
- John Deere 420 loader
- John Deere 430 loader
- John Deere 48 backhoe
John Deere 4310 Specifications
| General Specifications | |
| Model | John Deere 4310 |
| Length | 2,970 mm (116.9 in) |
| Width | 1,270 mm (50 in) |
| Height | 2,090 mm (82.3 in) |
| Wheel base | 1,720 mm (67.7 in) |
| Weight |
2WD: 1,180 kg (2,601 lbs) 4WD: 1,315 kg (2,900 lbs) |
| Fuel tank capacity | 37.9 liters (10 US gal.; 8.3 Imp. gal) |
| Battery | 12V, CCA 500A |
| Cabin type | Two-post ROPS or foldable ROPS (optional). |
| Engine | |
| Engine model | Yanmar 3TNE84 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 1.5 L, 1,496 cm2, (91.3 cu·in) |
| Bore and stroke | 84.0 mm X 90.0 mm (3.31 in X 3.54 in) |
| Compression ratio | 18.5:1 |
| Horsepower | 31.7 PS (23.3 kW; 31.2 HP) at 2,600 rpm |
| Starter | Electric |
| Oil capacity: | 4.3 L (4.5 US. qt, 3.8 Imp. qt.) |
| Coolant capacity: | 5.7 L (6 US. qt, 5 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | Wet disc |
| Differential lock | Mechanical |
| Front axle | 4.4 L (4.65 US qts, 3.87 Imp. qts) |
| Transmission model | SyncShift |
| Transmission type | Partially synchronized |
| Gears | 9 forward and 3 reverse |
| Speed | Forward: 24.0 kmh (14.9 mph) Reverse: 12.0 (7.5 mph) |
| Transmission oil capacity | 23.8 L (6.3 US. gal, 5.2 Imp. gal.) |
| Transmission model | eHydro |
| Transmission type | Hydrostatic |
| Gears | Infinite (3-range) forward and reverse |
| Speed | Forward: 28.2 kmh (17.5 mph) Reverse: 28.2 (17.5 mph) |
| Transmission oil capacity | 25.7 L (6.8 US. gal, 5.7 Imp. gal.) |
| Transmission model | ePowrReverser |
| Transmission type | Power shuttle |
| Gears | 12 forward and 12 reverse |
| Speed | Forward: 24.1 kmh (15 mph) Reverse: 24.1 (15 mph) |
| Transmission oil capacity | 23.8 L (6.3 US. gal, 5.2 Imp. gal.) |
| Tires | |
| Front tires | Ag: 5.00-15 (2WD), 7.00-14 (4WD) |
| Rear tires | Ag: 11.2-24 |
| Three-Point Hitch | |
| Caterogy | I |
| Control type | – |
| Lift capacity (at ends) | 997 kg (2,198 lbs) |
| PTO (Power take-off shaft) | |
| Middle PTO type | Optional |
| Middle PTO spped | 2,100 rpm |
| Rear PTO type | Independent |
| Rear PTO spped | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Pressure | 2,500 psi (172 bar) |
| Pump flow | 8.6 gpm (32.6 lpm) |
| Steering flow | 5.3 gpm (20.1 lpm) |
| Total flow | 13.9 gpm (52.6 lpm) |
Be the first to comment