The John Deere 440C is an industrial crawler manufactured by John Deere in Dubuque, Iowa, USA from 1958 to 1960.
The John Deere 440C is equipped with one of two engines: a 1.7 L (106.0 cu·in) two-cylinder diesel engine or a 1.9 L (113.3 cu·in) two-cylinder gasoline engine and one of two transmissions: a gear type transmission with 4 forward and 1 reverse gear and dry disc clutch or a gear type transmission with 5 forward and 1 reverse gear and dry disc clutch.
The tractor could be equipped with the following engines:
- General Motors 2-53. It is a 1.7 L, 1,737 cm2, (106.0 cu·in) two-cylinder supercharged diesel engine with 98.0 mm (3.86 in) of the cylinder bore and 114.0 mm (4.49 in) of the piston stroke. The compression ratio rating is 17.0:1.
- John Deere. It is a 1.9 L, 1,857 cm2, (113.3 cu·in) two-cylinder natural aspirated gasoline engine. The cylinder bore is 108.0 mm (4.25 in) and the piston stroke is 102.0 mm (4.02 in). The compression ratio rating is 7.5:1.
The John Deere 440C is equipped with manual clutches steering, contracting band brakes, an open operator station, and 39.7 liters (10.5 US gal.; 8.7 Imp. gal) fuel tank.
John Deere 440C Specifications
| General Specifications | |
| Model | John Deere 440C |
| Length | – |
| Width | – |
| Height | – |
| Wheel base | 1,750 mm (68.9 in) |
| Weight | Gasoline: 3,140 kg (6,923 lbs) Diesel: 3,300 kg (7,275 lbs) |
| Fuel tank capacity | 39.7 liters (10.5 US gal.; 8.7 Imp. gal) |
| Battery | 6V or 12V |
| Cabin type | Open operator station |
| Engine | |
| Engine model | General Motors 2-53 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 2 |
| Fuel type | Diesel |
| Displacement | 1.7 L, 1,737 cm2, (106.0 cu·in) |
| Bore and stroke | 98.0 mm X 114.0 mm (3.86 in X 4.49 in) |
| Compression ratio | 17.0:1 |
| Horsepower | – |
| Starter | Electric |
| Engine | |
| Engine model | John Deere |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 2 |
| Fuel type | Gasoline |
| Displacement | 1.9 L, 1,857 cm2, (113.3 cu·in) |
| Bore and stroke | 108.0 mm X 102.0 mm (4.25 in X 4.02 in) |
| Compression ratio | 7.5:1 |
| Horsepower | – |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | Crawler |
| Steering type | Manual clutches |
| Brakes | Contracting band |
| Transmission model | – |
| Transmission type | Gear type with dry disc clutch |
| Gears | 4 forward and 1 reverse |
| Transmission model | – |
| Transmission type | Gear type with dry disc clutch |
| Gears | 5 forward and 1 reverse |
| Tires | |
| Front tires | Tracks |
| Rear tires | Tracks |
| Three-Point Hitch | |
| Category | I |
| Control type | – |
| Lift capacity (at ends) | – |
| PTO (Power take-off shaft) | |
| Rear PTO type | – |
| Rear PTO speed | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Valves | 1 |
Be the first to comment