John Deere 4410

John Deere 4410The John Deere 4410 is a 4WD compact utility tractor from the 4000 Ten Compact series. This tractor was manufactured by John Deere in Augusta, Georgia, USA from 2002 to 2004. The JD 4410 is equipped with a 1.6 L three-cylinder diesel engine and one of two transmissions: ePowrReverser transmission with 12 forward and 12 reverse gears or eHydro hydrostatic type transmission with infinite (3-range) forward and reverse gears.

The John Deere 4410 compact utility tractor used the Yanmar 3TNE88 engine. It is a 1.6 L, 1,624 cm2, (99.1 cu·in) three-cylinder natural aspirated diesel engine with 88.0 mm (3.46 in) of the cylinder bore and 90.0 mm (3.54 in) of the piston stroke. The compression ratio rating is 18.5:1. This engine produced 35.1 PS (25.8 kW; 34.6 HP) at 2,600 rpm of gross output power and 87.9 N·m (9 kg·m, 64.8 ft·lb) at 2,600 rpm of torque.

The John Deere 4410 is equipped with power steering, wet disc brakes, two-post ROPS or foldable ROPS and 37.9 liters (10 US gal.; 8.3 Imp. gal) fuel tank.

Following attachments are available for the JD 4410 compact utility tractor:

  • Mid-mount John Deere 60 7-Iron 60 in (1,520 mm) mower deck with 3-blades
  • Mid-mount John Deere 72 in (1,820 mm) mower deck with 3-blades
  • John Deere 430 loader
  • John Deere 48 backhoe

John Deere 4410 Specifications

General Specifications
Model John Deere 4410
Length 2,970 mm (116.9 in)
Width 1,270 mm (50 in)
Height (fixed ROPS) 2,090 mm (82.3 in)
Wheel base 1,720 mm (67.7 in)
Weight 1315 kg (2899.1 lbs)
Fuel tank capacity 37.9 liters (10 US gal.; 8.3 Imp. gal)
Battery 12V, CCA 500A
Cabin type Two-post ROPS or foldable ROPS (optional)
Engine
Engine model Yanmar 3TNE88
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 1.6 L, 1,624 cm2, (99.1 cu·in)
Bore and stroke 88.0 mm X 90.0 mm (3.46 in X 3.54 in)
Compression ratio 18.5:1
Horsepower 35.1 PS (25.8 kW; 34.6 HP) at 2,600 rpm
Torque 87.9 N·m (9 kg·m, 64.8 ft·lb) at 2,600 rpm
Starter Electric
Oil capacity: 4.3 L (4.5 US. qt, 3.8 Imp. qt.)
Coolant capacity: 5.7 L (6 US. qt, 5 Imp. qt.)
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Power
Brakes Wet disc
Transmission model ePowrReverser
Transmission type Power shuttle
Gears 12 forward and 12 reverse
Speed Forward: 24.1 kmh (15 mph) Reverse: 24.1 (15 mph)
Transmission oil capacity 23.8 L (6.3 US. gal, 5.2 Imp. gal.)
Transmission model eHydro
Transmission type Hydrostatic
Gears Infinite (3-range) forward and reverse
Speed Forward: 28.2 kmh (17.5 mph) Reverse: 28.2 (17.5 mph)
Transmission oil capacity 25.7 L (6.8 US. gal, 5.7 Imp. gal.)
Tires
Front tires Ag: 7.00-14
Rear tires Ag: 11.2-24
Three-Point Hitch
Caterogy I
Control type
Lift capacity (at 610 mm /24 in) 997 kg (2,200 lbs)
PTO (Power take-off shaft)
Middle PTO type Independent
Middle PTO speed 2,100 rpm
Rear PTO type Independent
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Pressure 2500 psi (172.4 bar)
Valves 5
Pump flow 8.6 gpm (32.6 lpm)
Steering flow 5.3 gpm (20.1 lpm)
Total flow 13.9 gpm (52.6 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*