John Deere 4510

John Deere 4510The John Deere 4510 is a 2WD or 4WD compact utility tractor from the 4000 Ten Compact series. This tractor was manufactured by the John Deere in Augusta, Georgia, USA from 2003 to 2004. The JD 4510 is equipped with a 2.0 L four-cylinder diesel engine and one of two transmissions: SyncShift transmission with 9 forward and 3 reverse gears or PowrReverser transmission with 12 forward and 12 reverse gears.

The John Deere 4510 compact utility tractor used the Yanmar 4TNE84 engine. It is a 2.0 L, 1,995 cm2, (121.7 cu·in) four-cylinder natural aspirated diesel engine with 84.0 mm (3.31 in) of the cylinder bore and 90.0 mm (3.54 in) of the piston stroke. The compression ratio rating is 18.0:1. This engine produced 38.9 PS (28.6 kW; 38.4 HP) at 2,600 rpm of maximum output power and 124.8 N·m (12.7 kg·m, 92 ft·lb) at 1,700 rpm of torque.

The JD 4510 is equipped with power steering, wet disc brakes, open operator station with ROPS and 47.3 liters (12.5 US gal.; 10.4 Imp. gal) fuel tank.

Following attachments are available for the John Deere 4510 compact utility tractor:

  • Mid-mount John Deere 72 in (1,820 mm) mower deck with 3-blades
  • John Deere 460 loader

John Deere 4510 Specifications

General Specifications
Model John Deere 4510
Length 3,420 mm (134.6 in)
Width 1,570 mm (61.8 in)
Height 2,320 mm (91.3 in)
Wheel base 1,810 mm (71.3 in)
Weight 1,564 kg (3,448 lbs)
Fuel tank capacity 47.3 liters (12.5 US gal.; 10.4 Imp. gal)
Battery 12V, CCA 690A
Cabin type Open operator station with ROPS
Engine
Engine model Yanmar 4TNE84
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 2.0 L, 1,995 cm2, (121.7 cu·in)
Bore and stroke 84.0 mm X 90.0 mm (3.31 in X 3.54 in)
Compression ratio 18.0:1
Horsepower 38.9 PS (28.6 kW; 38.4 HP) at 2,600 rpm
Torque 124.8 N·m (12.7 kg·m, 92 ft·lb) at 1,700 rpm
Starter Electric
Oil capacity: 4.8 L (5.1 US. qt, 4.2 Imp. qt.)
Coolant capacity: 6.1 L (6.4 US. qt, 5.4 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power
Brakes Wet disc
Transmission model SyncShift
Transmission type Partially synchronized
Gears 9 forward and 3 reverse
Speed Forward: 23.3 kmh (14.5 mph) Reverse: 14.3 (8.9 mph)
Transmission oil capacity 36.7 L (9.7 US. gal, 8.1 Imp. gal.)
Transmission model PowrReverser
Transmission type Power shuttle
Gears 12 forward and 12 reverse
Speed Forward: 25.6 kmh (15.9 mph) Reverse: – (0 mph)
Transmission oil capacity 36.7 L (9.7 US. gal, 8.1 Imp. gal.)
Tires
Front tires Ag: 6.00-16 (2WD), 7.00-16 or 8.00-16 (4WD)
Lawn/turf: 27×10.5-15, 27x12LL-15 (4WD)
Industrial: 10.00-16.5 (4WD)
Rear tires Ag: 13.6-24, 14.9-24
Lawn/turf: 44×18.00-20, 22.5LL-16.1
Industrial: 17.5L-24
Three-Point Hitch
Caterogy I
Control type
Lift capacity (at ends) 1,134 kg (2,500 lbs)
PTO (Power take-off shaft)
Middle PTO type Optional
Middle PTO spped 2,100 rpm
Rear PTO type Independent
Rear PTO spped 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 36.7 L (38.78 US. qt, 32.29 Imp. qt.)
Pressure 2,500 psi (172 bar)
Pump flow 10.6 gpm (40.1 lpm)
Steering flow 5.3 gpm (20.1 lpm)
Total flow 15.9 gpm (60.2 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*