The John Deere 5055E is a 4WD utility tractor from the 5E series. This tractor has been manufactured by John Deere in Pune, Maharashtra, India since 2008. This first version was manucatured from 2008 to 2012. The JD 5055E is equipped with a 2.9 L (179.0 cu·in) three-cylinder diesel engine and a partially synchronized transmission with 9 forward and 3 reverse gears.
The JD 5055E utility tractor used the John Deere PowerTech 3029H engine. It is a 2.9 L, 2,933 cm2, (179.0 cu·in) three-cylinder turbocharged diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. This engine produced 55.8 PS (41.0 kW; 55.0 HP) at 2,400 rpm of output power and 215.1 N·m (21.9 kg·m, 158.5 ft·lb) at 1,700 rpm of torque.
The John Deere 5055E is equipped with hydrostatic power steering, hydraulic wet disc brakes, two-post foldable ROPS, and 68.1 liters (18 US gal.; 15 Imp. gal) fuel tank. This utility tractor could be equipped with John Deere 553 loader.
John Deere 5055E Specifications
| General Specifications | |
| Model | John Deere 5055E |
| Length | 3,500 mm (137.8 in) |
| Width | 1,450 mm (57.1 in) |
| Height (ROPS) | 2,400 mm (94.5 in) |
| Wheel base | 2,040 mm (80.3 in) |
| Ground clearance | 340 mm (13.4 in) |
| Weight | – |
| Fuel tank capacity | 68.1 liters (18 US gal.; 15 Imp. gal) |
| Battery | 12V, CCA 623A |
| Cabin type | Two-post foldable ROPS |
| Engine | |
| Engine model | John Deere PowerTech 3029H |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 2.9 L, 2,933 cm2, (179.0 cu·in) |
| Bore and stroke | 106.0 mm X 110.0 mm (4.17 in X 4.33 in) |
| Horsepower | 55.8 PS (41.0 kW; 55 HP) at 2,400 rpm |
| Torque | 215.1 N·m (21.9 kg·m, 158.5 ft·lb) at 1,700 rpm |
| Starter | Electric |
| Oil capacity: | 8.5 L (9 US. qt, 7.5 Imp. qt.) |
| Coolant capacity: | 9.5 L (10 US. qt, 8.4 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Hydrostatic power |
| Brakes | Hydraulic wet disc |
| Final drive | Planetary |
| Differential lock | Rear standard |
| Transmission model | SyncShuttle |
| Transmission type | Partially synchronized |
| Gears | 9 forward and 3 reverse |
| Speed | Forward: 25.8 kmh (16 mph) Reverse: 20.0 kmh (12.4 mph) |
| Transmission oil capacity | 39.0 L (10.3 US. gal, 8.6 Imp. gal.) |
| Tires | |
| Front tires | Ag: 9.5-24 Lawn/turf: 9.5-16 Industrial: 12.5/80-18 |
| Rear tires | Ag: 14.9-28 Lawn/turf: 21.5L-16.1 Industrial: 16.9-24 |
| Three-Point Hitch | |
| Category | II |
| Control type | Position and top-link draft control |
| Lift capacity (at 610 mm / 24 in) | 1,447 kg (3,190 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent with mechanical clutch |
| Rear PTO speed | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Hydraulic capacity | 39.0 L (10.3 US. gal, 8.6 Imp. gal.) |
| Pressure | 2828 psi (195 bar) |
| Valves | Rear: 1 or 2 Mid: 2 |
| Pump flow | 11.4 gpm (43.2 lpm) |
| Steering flow | 6.8 gpm (25.7 lpm) |
| Total flow | 18.2 gpm (68.9 lpm) |
Be the first to comment