The John Deere 5085M is a 2WD or 4WD utility tractor from the 5M series. This tractor was manufactured by John Deere in Augusta, Georgia, USA from 2008 to 2018. This second generation was manufactured from 2012 to 2014.
The JD 5085M is equipped with a 4.5 L (276.0 cu·in) four-cylinder diesel engine and one of three transmissions: a partially synchronized transmission with 12 forward and 4 reverse gears, a partially synchronized with power shuttle transmission with 16 forward and 16 reverse gears or a partially synchronized with power shuttle transmission with 32 forward and 16 reverse gears.
The JD 5085M utility tractor used the John Deere engine. It is a 4.5 L, 4,523 cm2, (276.0 cu·in) four-cylinder turbocharged diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 86.2 PS (63.4 kW; 85.0 HP) at 2,200 rpm of output power.
The John Deere 5085M is equipped with hydrostatic power steering, hydraulic wet disc brakes, foldable ROPS, isolated platform, cab or deluxe cab (optional) and 113.6 liters (30 US gal.; 25 Imp. gal) fuel tank for ROPS version or 136.3 liters (36 US gal, 30 Imp. gal) for the cab version.
Following attachments are available for the John Deere 5085M utility tractor:
- John Deere H260 loader
- John Deere H310 loader
John Deere 5085M Specifications
| General Specifications | |
| Model | John Deere 5085M |
| Length | – |
| Width | – |
| Height | – |
| Wheel base | 2,300 mm (90.6 in) |
| Weight (operating) | 2WD ROPS: 3,170 kg (7,000 lbs) 2WD IROPS: 3,380 kg (7,450 lbs) 2WD Cab: 3,720 kg (8,200 lbs) 4WD ROPS: 3,356 kg (7,400 lbs) 4WD IROPS: 3,560 kg (7,850 lbs) 4WD Cab: 3,900 kg (8,600 lbs) |
| Fuel tank capacity | ROPS: 113.6 liters (30 US gal.; 25 Imp. gal) Cab: 136.3 liters (36 US gal, 30 Imp. gal) |
| Battery | 12V, CCA 925A |
| Cabin type | Foldable ROPS, isolated platform, cab or deluxe cab (optional) |
| Engine | |
| Engine model | John Deere |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Diesel |
| Displacement | 4.5 L, 4,523 cm2, (276.0 cu·in) |
| Bore and stroke | 106.0 mm X 127.0 mm (4.17 in X 5 in) |
| Horsepower | 86.2 PS (63.4 kW; 85 HP) at 2,200 rpm |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD (optional) |
| Steering type | Hydrostatic power |
| Brakes | Hydraulic wet disc |
| Final drive | Inboard planetary |
| Differential lock | Shift-on-the-move electro-hydraulic rear differential lock |
| Transmission model | SyncShuttle Plus |
| Transmission type | Partially synchronized |
| Gears | 12 forward and 4 reverse |
| Speed | Forward: 29.0 kmh (18.0 mph) Reverse: 19.3 kmh (12.0 mph) |
| Transmission model | PowrReverser |
| Transmission type | Partially synchronized with power shuttle |
| Gears | 16 forward and 16 reverse |
| Transmission model | PowrReverser Plus |
| Transmission type | Partially synchronized with power shuttle |
| Gears | 32 forward and 16 reverse |
| Tires | |
| Front tires | Ag: 11.2-24 (4WD) |
| Rear tires | Ag: 16.9-30 |
| Three-Point Hitch | |
| Category | II/I |
| Control type | Position control and lower-link draft sensing |
| Lift capacity (at 610 mm/ 24 in) | 2,175 kg (4,800 lbs) 2,692 kg (5,935 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent with electro-hydraulic wet disc clutch |
| Rear PTO speed | 540/540E or 540 (SyncShuttle) |
| Hydraulic system | |
| Hydraulic type | Open center |
| Hydraulic capacity | 45.0 L (11.9 US. gal, 9.9 Imp. gal.) |
| Pressure | 2828 psi (195 bar) |
| Valves | Rear: 2 or 3 Middle: 2 or 3 |
| Pump flow | 18.4 gpm (69.7 lpm) |
| Steering flow | 6.3 gpm (23.8 lpm) |
| Total flow | 24.7 gpm (93.5 lpm) |
Be the first to comment