John Deere 5090R utility tractor: review and specs

The John Deere 5090R is a 4WD utility tractor from the 5R series. This tractor has been manufactured by John Deere in Augusta, Georgia, USA since 2009, this second generation has been manufactured since 2017. The John Deere 5090R is equipped with a 4.5 L (276.0 cu·in) four-cylinder diesel engine and one of two transmissions: a four-speed power shift transmission with 16 forward and 16 reverse gears or a eight-speed power shift transmission with 32 forward and 16 reverse gears.

The JD 5090R utility tractor used the John Deere PowerTech PWX engine. It is a 4.5 L, 4,523 cm², (276.0 cu·in) four-cylinder wastegate turbocharged diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 91.3 PS (67.1 kW; 90.0 HP) at 2,200 rpm of output power.

The John Deere 5090R is equipped with power steering, hydraulic wet disc brakes, cab (standard) and 177.9 liters (47 US gal.; 39.1 Imp. gal) fuel tank.

Following attachments are available for the John Deere 5090R utility tractor:

John Deere 543R NSL loader
John Deere 603R NSL loader
John Deere 603R MSL loader
John Deere 603R HSL loader

John Deere 5090R Specifications

General Specifications
Model	John Deere 5090R
Length	3,650 mm (143.7 in)
Width	2,150 mm (84.6 in)
Height	2,690 mm (105.9 in)
Wheel base	2,250 mm (88.6 in)
Weight	4,300 kg (9,480 lbs)
Fuel tank capacity	177.9 liters (47 US gal.; 39.1 Imp. gal)
Battery	12V, CCA 550A
Cabin type	Cab (standard)
Engine
Engine model	John Deere PowerTech PWX
Engine type	Four-stroke, liquid-cooled, inline
Cylinders	4
Fuel type	Diesel
Displacement	4.5 L, 4,523 cm², (276.0 cu·in)
Bore and stroke	106.0 mm X 127.0 mm (4.17 in X 5 in)
Horsepower	91.3 PS (67.1 kW; 90.0 HP) at 2,200 rpm
Torque	393.1 N·m (40.1 kg·m, 289.7 ft·lb) at 1,500 rpm
Starter	Electric

Transmission and chassis
Chassis	4×4 MFWD 4WD
Steering type	Power
Brakes	Hydraulic wet disc
Differential lock	Electro-hydraulic rear; Limited-slip front; Electro-hydraulic front
Transmission model	CommandQuad
Transmission type	Four-speed power shift
Gears	16 forward and 16 reverse
Transmission model	Command8
Transmission type	Eight-speed power shift
Gears	32 forward and 16 reverse
Tires
Front tires	Ag: 480/65R24
Rear tires	Ag: 540/65R38

Three-Point Hitch
Category	II
Control type	Electronic lower-link draft sensing
Lift capacity (at 610 mm/24 in)	2,753 kg (6,070 lbs) 3,080 kg (6,790 lbs)
PTO (Power take-off shaft)
Front PTO type	Independent with electro-hydraulic clutch
Front PTO speed	1,000 rpm
Rear PTO type	Independent with electro-hydraulic clutch
Rear PTO speed	540/540E/1,000 rpm
Hydraulic system
Hydraulic type	Open center Load-sensing pressure-flow compensated
Valves	Mid: 3 Rear: 4
Pump flow	25.4 gpm (96.1 lpm) Optional: 30.9 gpm (117 lpm)

ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.