The John Deere 6110M is a 2WD/4WD utility tractor from the 6M series. This tractor has been manufactured by John Deere in Mannheim, Baden-Württemberg, Germany from 2015. This first generation was manufactured from 2015 to 2020. JD 6110M is equipped with a 4.5 L (276.0 cu·in) six-cylinder diesel engine and one of four transmission variants.
The John Deere 6110M utility tractor used the John Deere PowerTech PSS engine. It is a 4.5 L, 4,523 cm2, (276.0 cu·in) six-cylinder turbocharged aftercooled diesel engine with 105.0 mm (4.13 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 111.5 PS (82.0 kW; 110.0 HP) at 2,100 rpm of output power.
The JD 6110M is equipped with power steering, hydraulic wet disc brakes, Cab (standard) or two-post folding ROPS (optional) and 193.0 liters (51 US gal.; 42.5 Imp. gal) fuel tank.
Following attachments are available for the John Deere 6110M utility tractor:
- John Deere 620R loader
- John Deere 640R loader
John Deere 6110M Specifications
General Specifications | |
Model | John Deere 6110M |
Length | 4,480 mm (176.4 in) |
Width | 2,550 mm (100.4 in) |
Height |
ROPS: 2,870 mm (113 in) Cab: 2,870 mm (113 in) |
Wheel base | 2,580 mm (101.6 in) |
Ground clearance (front axle) | 600 mm (23.6 in) |
Weight (shipping) | 5,007 kg (11,039 lbs) |
Fuel tank capacity | 193.0 liters (51 US gal.; 42.5 Imp. gal) |
Battery | 12V |
Cabin type | Cab (standard) or two-post folding ROPS (optional) |
Engine | |
Engine model | John Deere PowerTech PSS |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 6 |
Fuel type | Diesel |
Displacement | 4.5 L, 4,523 cm2, (276.0 cu·in) |
Bore and stroke | 105.0 mm X 127.0 mm (4.13 in X 5 in) |
Horsepower | 111.5 PS (82.0 kW; 110.0 HP) at 2,100 rpm |
Starter | Electric |
Coolant capacity: | 22.0 L (23.2 US. qt, 19.4 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×2 2WD or 4×4 MFWD 4WD |
Steering type | Power |
Brakes | Hydraulic wet disc |
Differential lock | Electro-hydraulic front and rear |
Transmission model | SyncroPlus |
Transmission type | – |
Gears | 12 forward and 4 reverse |
Transmission model | PowrQuad |
Transmission type | Four-speed power shift with wet disc clutch |
Gears | 16 forward and 16 reverse |
Speed | Forward: 30.1 kmh (18.7 mph) Reverse: 31.3 kmh (19.5 mph) |
Transmission model | PowrQuad |
Transmission type | Four-speed power shift with wet disc clutch |
Gears | 24 forward and 24 reverse |
Speed | Forward: 37.5 kmh (23.3 mph) Reverse: 39.9 kmh (24.8 mph) |
Transmission model | AutoQuad PLUS |
Transmission type | Four-speed power shift with wet disc clutch |
Gears | 24 forward and 24 reverse |
Speed | Forward: 37.5 kmh (23.3 mph) Reverse: 39.9 kmh (24.8 mph) |
Tires | |
Front tires | Ag: 10.00-16 (2WD), 380/85R28 (4WD) |
Rear tires | Ag: 460/85R38 |
Three-Point Hitch | |
Category | IIIN/II |
Control type | Electronic lower-link draft sensing |
Lift capacity |
2531 kg (5581 lbs) Optional: 3370 kg (7431 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Independent with electro-hydraulic clutch |
Rear PTO speed | 540/1000 (1.375) or 540 rpm |
Hydraulic system | |
Hydraulic type | Open center or closed-center pressure-and-flow compensated load sensing |
Pressure | 200.0 psi (13.8 bar) |
Valves | Rear: 3 Mid: 3 |
Pump flow |
21.1 gpm (79.9 lpm) 30.0 gpm (113.6 lpm) |
SCV flow | 21.1 gpm (79.9 lpm) |