John Deere 6140D (2008-2012)

John Deere 6140DThe John Deere 6140D is a 4WD utility tractor from the 6D series. This tractor was manufactured by John Deere in Saltillo, Mexico from 2008 to 2016. This first generation was manufactured from 2008 ot 2012. The John Deere 6140D is equipped with a 4.5 L (276.0 cu·in) four-cylinder diesel engine and a partially synchronized with power shuttle transmission with 9 forward and 9 reverse gears.

The JD 6140D utility tractor used the John Deere 4045H PowerTech E engine. It is a 4.5 L, 4,523 cm2, (276.0 cu·in) four-cylinder turbocharged intercooled diesel engine with 107.0 mm (4.21 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 19.0:1. This engine produced 139.8 PS (102.8 kW; 138.0 HP) at 2,100 rpm of output power.

The John Deere 6140D is equipped with hydrostatic power steering, differential mechanical wet disc brakes, folding 2-post ROPS or cab and 157.8 liters (41.7 US gal.; 34.7 Imp. gal) fuel tank.

Following attachments are available for the JD 6140D utility tractor:

  • John Deere 563 loader
  • John Deere 673 loader

John Deere 6140D Specifications

General Specifications
Model John Deere 6140D
Length 4,210 mm (165.7 in)
Width 1,820 mm (71.7 in)
Height (cab) 2,730 mm (107.5 in)
Wheel base 2,340 mm (92.1 in)
Ground clearance (front axle) 450 mm (17.7 in)
Weight (shipping) ROPS: 3,960 kg (8,730 lbs)
Cab: 4,260 kg (9,392 lbs)
Fuel tank capacity 157.8 liters (41.7 US gal.; 34.7 Imp. gal)
Battery 12V, CCA 925A
Cabin type Folding 2-post ROPS or cab
Engine model John Deere 4045H PowerTech E
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 4.5 L, 4,523 cm2, (276.0 cu·in)
Bore and stroke 107.0 mm X 127.0 mm (4.21 in X 5 in)
Compression ratio 19.0:1
Horsepower 139.8 PS (102.8 kW; 138.0 HP) at 2,100 rpm
Torque 524.8 N·m (53.5 kg·m, 386.8 ft·lb) at 1,500 rpm
Starter Electric
Oil capacity: 12.3 L (13 US. qt, 10.8 Imp. qt.)
Coolant capacity: 16.5 L (17.4 US. qt, 14.5 Imp. qt.)
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Differential mechanical wet disc
Transmission model John Deere PowrReverser
Transmission type Partially synchronized with power shuttle
Gears 9 forward and 9 reverse
Speed Forward: 28.3 kmh (17.6 mph) Reverse: 29.3 kmh (18.2 mph)
Front tires Ag: 14.9-24
Rear tires Ag: 18.4-34
Three-Point Hitch
Category II
Control type Mechanical lower link
Lift capacity (at 610 mm/24 in) 3,085 kg (6,800 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent with dry disc clutch
Rear PTO speed 540/1000 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 57.9 L (15.3 US. gal, 12.7 Imp. gal.)
Pressure 2830 psi (195.1 bar)
Valves 2 to 3
Pump flow 17.6 gpm (66.6 lpm)
Steering flow 6.9 gpm (26.1 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.