The John Deere 6155M is a 2WD or 4WD utility tractor from the 6M series. This tractor has been manufactured by John Deere in Mannheim, Baden-Württemberg, Germany from 2015. The John Deere 6155M is equipped with a 6.8 L (414.0 cu·in) six-cylinder diesel engine and one of three transmissions variants.
The JD 6155M utility tractor used the John Deere 6068HL555 engine. It is a 6.8 L, 6,784 cm2, (414.0 cu·in) six-cylinder turbocharged diesel engine with 105.0 mm (4.13 in) of the cylinder bore and 127.0 mm (5.00 in) of the piston stroke. This engine produced 157.2 PS (115.6 kW; 155.0 HP) at 2,100 rpm of output power.
The John Deere 6155M is equipped with power steering, hydraulic wet disc brakes, cab (standard) with air-conditioning and 270.0 liters (71.3 US gal.; 59.4 Imp. gal) fuel tank.
Following attachments are available for the JD 6155M utility tractor:
- John Deere 660R loader
- John Deere 660R MSL loader
John Deere 6155M Specifications
| General Specifications | |
| Model | John Deere 6155M |
| Length | 4,720 mm (185.8 in) |
| Width | – |
| Height (cab) | 2,970 mm (116.9 in) |
| Wheel base | 2,760 mm (108.7 in) |
| Ground clearance (front axle) | 530 mm (20.9 in) |
| Weight | 6,700 kg (14,771 lbs) |
| Fuel tank capacity | 270.0 liters (71.3 US gal.; 59.4 Imp. gal) |
| Battery | 12V, 154 Ah |
| Cabin type | Cab (standard) with air-conditioning |
| Engine | |
| Engine model | John Deere 6068HL555 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 6 |
| Fuel type | Diesel |
| Displacement | 6.8 L, 6,784 cm2, (414.0 cu·in) |
| Bore and stroke | 105.0 mm X 127.0 mm (4.13 in X 5.00 in) |
| Horsepower | 157.2 PS (115.6 kW; 155.0 HP) at 2,100 rpm |
| Torque | 726.1 N·m (74 kg·m, 535.1 ft·lb) at 1,600 rpm |
| Starter | Electric |
| Oil capacity: | 23.5 L (24.8 US. qt, 20.7 Imp. qt.) |
| Coolant capacity: | 27.0 L (28.5 US. qt, 23.8 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | Hydraulic wet disc |
| Final drive | Planetary |
| Differential lock | Electro-hydraulic |
| Transmission model | PowrQuad |
| Transmission type | Four-speed power shift |
| Gears | 16 forward and 16 reverse |
| Speed | Forward: 30.6 kmh (19.0 mph) |
| Transmission model | PowrQuad/AutoQuad |
| Transmission type | Four-speed power shift |
| Gears | 20 forward and 20 reverse |
| Speed | Forward: 40.2 kmh (25.0 mph) |
| Transmission model | CommandQuad |
| Transmission type | Four-speed power shift |
| Gears | 20 forward and 20 reverse |
| Speed | Forward: 40.2 kmh (25.0 mph) |
| Tires | |
| Front tires | Ag: 320/85R34 (2WD), 380/85R28 (4WD) |
| Rear tires | Ag: 460/85R42 |
| Three-Point Hitch | |
| Category | IIIN/III |
| Control type | Electronic lower link draft sensing |
| Lift capacity (at ends) | 6,800 kg (14,994 lbs) 7,650 kg (16,865 lbs) |
| PTO (Power take-off shaft) | |
| Front PTO type | Independent with electro-hydraulic wet disc clutch |
| Front PTO speed | 1000 rpm |
| Rear PTO type | Independent with electro-hydraulic clutch |
| Rear PTO speed | 540/1000 rpm |
| Hydraulic system | |
| Hydraulic type | Closed center pressure and flow compensated |
| Valves | Rear: 2 to 4 Front: 0 to 3 |
| Pump flow | 30.0 gpm (113.6 lpm) |
Be the first to comment