John Deere 6300

John Deere 6300The John Deere 6300 is a 2WD or 4WD utility tractor from the 6000 series. This tractor was manufactured by John Deere in Mannheim, Baden-Württemberg, Germany from 1992 to 1997. The John Deere 6300 is equipped with a 3.9 L (239.0 cu·in) four-cylinder diesel engine and one of two transmissions: a fully synchronized transmission with 12 forward and 4 reverse gears (21 forward and 7 reverse with creeper) or a partial power shift transmission with 16 forward and 16 reverse gears (28 forward and 28 reverse).

The JD 6300 utility tractor used the John Deere CD4039 engine. It is a 3.9 L, 3,916 cm2, (239.0 cu·in) four-cylinder turbocharged diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. This engine produced 76 PS (55.9 kW; 75.0 HP) at 2,300 rpm of output power.
The John Deere 6300 is equipped with power steering, hydraulic wet disc brakes, Two-post folding ROPS or ComfortGard Cab (optional) and 109.8 liters (29 US gal.; 24.2 Imp. gal) fuel tank.

Following attachments are available for the JD 6300 utility tractor:

  • John Deere 620 loader
  • John Deere 640NSL loader
  • John Deere 640SL loader

John Deere 6300 Specifications

General Specifications
ModelJohn Deere 6300
Wheel base2,400 mm (94.5 in)
Ground clearance (front axle) 2WD: 450 mm (17.7 in)
High-Clearance: 670 mm (26.4 in)
Weight (shipping) 2WD ROPS: 3,400 kg (7,500 lbs)
2WD Cab: 3,630 kg (8,000 lbs)
4WD ROPS: 3,630 kg (8,003 lbs)
4WD Cab: 3,860 kg (8,510 lbs)
Fuel tank capacity ROPS: 109.8 liters (29.0 US gal.; 24.2 Imp. gal)
Cab: 165.0 liters (43.6 US gal, 36.3 Imp. gal)
Cabin typeTwo-post folding ROPS or ComfortGard Cab (optional)
Engine modelJohn Deere CD4039
Engine typeFour-stroke, liquid-cooled, inline
Fuel typeDiesel
Displacement3.9 L, 3,916 cm2, (239.0 cu·in)
Bore and stroke106.0 mm X 110.0 mm (4.17 in X 4.33 in)
Horsepower76 PS (55.9 kW; 75.0 HP) at 2,300 rpm
Oil capacity:12.1 L (12.8 US. qt, 10.6 Imp. qt.)
Coolant capacity: ROPS: 13.7 L (14.5 US. qt, 12.1 Imp. qt.)
Cab: 17.5 L (18.5 US. qt, 15.4 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD or 4×4 MFWD 4WD
Steering typePower
BrakesHydraulic wet disc
Transmission modelJohn Deere SyncroPlus
Transmission typeFully synchronized with triple wet disc PermaClutch clutch
Gears12 forward and 4 reverse
Speed Forward: 29.8 kmh (18.5 mph) Reverse: 20.3 kmh (12.6 mph)
Transmission modelJohn Deere PowrQuad
Transmission typePartial power shift with triple wet disc PermaClutch clutch
Gears16 forward and 16 reverse
Speed Forward: 29.8 kmh (18.5 mph) Reverse: 35.7 kmh (22.2 mph)
Front tires Ag: 7.50-18 (2WD), 12.4-24 (4WD), 13.6-38 (High-Clearance)
Rear tires Ag: 18.4-30 (2WD/4WD), 13.6-46 (High-Clearance)
Three-Point Hitch
Control typeLower link draft sensing
Lift capacity (at 610 mm/24 in)2,220 kg (4895 lbs)
PTO (Power take-off shaft)
Rear PTO typeIndependent
Rear PTO speed540, 540/1000 rpm
Hydraulic system
Hydraulic typeClosed-center pressure flow compensated (PFC)
Hydraulic capacity2900 L (766.1 US. gal, 637.9 Imp. gal.)
Valves1 to 5
Steering flow25.0 gpm (94.6 lpm)
Total flow16.0 gpm (60.6 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.