John Deere 7200

John Deere 7200The John Deere 7200 is a 2WD or 4WD row-crop tractor from the 7000 series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 1993 to 1996. The JD 7200 is equipped with a 5.9 L (359.0 cu·in) six-cylinder diesel engine and one of two transmissions: the SyncroPlus transmission with 12 forward and 4 reverse gears or the PowrQuad transmission with 16 forward and 12 reverse gears and hydraulic wet disc clutch.

The JD 7200 row-crop tractor used the John Deere 6068 engine. It is a 5.9 L, 5,883 cm2, (359.0 cu·in) six-cylinder turbocharged diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 17.8:1. This engine produced 93.3 PS (68.6 kW; 92.0 HP) at 2,100 rpm of output power.

The John Deere 7200 is equipped with power steering, independent hydraulic wet disc brakes, cab standard with air-conditioning, and 204.4 liters (54 US gal.; 45 Imp. gal) fuel tank.

John Deere 7200 Specifications

General Specifications
Model John Deere 7200
Wheel base 2,840 mm (111.8 in)
Weight (operating) 5,750 kg (12,677 lbs)
Fuel tank capacity 204.4 liters (54 US gal.; 45 Imp. gal)
Battery 12V
Cabin type Cab standard with air-conditioning
Engine model John Deere 6068
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 5.9 L, 5,883 cm2, (359.0 cu·in)
Bore and stroke 106.0 mm X 110.0 mm (4.17 in X 4.33 in)
Compression ratio 17.8:1
Horsepower 93.3 PS (68.6 kW; 92.0 HP) at 2,100 rpm
Starter Electric
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power
Brakes Independent hydraulic wet disc
Transmission model SyncroPlus
Transmission type
Gears 12 forward and 4 reverse
Speed Forward: 29.7 kmh (18.5 mph) Reverse: 19.6 (12.2 mph)
Transmission model PowrQuad
Transmission type Four-speed power shift with hydraulic wet disc clutch
Gears 16 forward and 12 reverse
Speed Forward: 29.7 kmh (18.5 mph) Reverse: 16.9 (10.5 mph)
Front tires Ag: 10.00×16
Rear tires Ag: 18.4×38
Three-Point Hitch
Category IIIN/II
Control type
Lift capacity (at 610 mm / 24 in) 3,110 kg (6,860 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540/1000 rpm
Hydraulic system
Hydraulic type Closed center
Valves 2 to 3
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.