John Deere 80

John Deere 80The John Deere 80 is a 2WD standard-tread tractor manufactured by John Deere in Waterloo, Iowa, USA from 1955 to 1956. The John Deere 80 is equipped with a 7.7 L (470.7 cu·in) two-cylinder diesel engine and a unsynchronized gear transmission with 6 forward and 1 reverse gears.

The John Deere 80 standard-tread tractor used the John Deere engine. It is a 7.7 L, 7,713 cm2, (470.7 cu·in) two-cylinder natural aspirated diesel engine with 156.0 mm (6.14 in) of the cylinder bore and 203.0 mm (7.99 in) of the piston stroke. The compression ratio rating is 16.0:1. This engine produced 46.9 PS (34.5 kW; 46.3 HP) at 1125 rpm of drawbar output power.

The JD 80 is equipped with manual or power assist (optional) steering, mechanical expanding shoe brakes, open operator station or steel cab (optional), and 123.0 liters (32.5 US gal.; 27.1 Imp. gal) fuel tank.

John Deere 80 Specifications

General Specifications
Model John Deere 80
Length 3,620 mm (142.5 in)
Width 2,010 mm (79.1 in)
Height 2,050 mm (80.7 in)
Wheel base 2,170 mm (85.4 in)
Weight (ballasted) 5,210 kg (11,486 lbs)
Fuel tank capacity 123.0 liters (32.5 US gal.; 27.1 Imp. gal)
Battery 6V
Cabin type Open operator station or steel cab (optional)
Engine
Engine model John Deere
Engine type Four-stroke, liquid-cooled, inline
Cylinders 2
Fuel type Diesel
Displacement 7.7 L, 7,713 cm2, (470.7 cu·in)
Bore and stroke 156.0 mm X 203.0 mm (6.14 in X 7.99 in)
Compression ratio 16.0:1
Horsepower (drawbar) 46.9 PS (34.5 kW; 46.3 HP) at 1125 rpm
Starter V4 gasoline pony motor
Coolant capacity: 33.1 L (35 US. qt, 29.1 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD
Steering type Manual or power assist (optional)
Brakes Mechanical expanding shoe
Transmission model John Deere
Transmission type Unsynchronized gear with dry disc clutch
Gears 6 forward and 1 reverse
Speed Forward: 19.7 kmh (12.2 mph) Reverse: 4.3 kmh (2.7 mph)
Tires
Front tires Ag: 7.50-18
Rear tires Ag: 15-34
PTO (Power take-off shaft)
Rear PTO type
Rear PTO speed 540 rpm
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*