John Deere 8245R (2014-2019)

John Deere 8245RThe John Deere 8245R is a 4WD row-crop tractor from the 8R series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 2014 to 2019. The JD 8245R is equipped with a 9.0 L (548.0 cu·in) six-cylinder diesel engine and one of two transmissions: a full power shift transmission with 16 forward and 4 reverse gears or a infinitely variable transmission (IVT) transmission with infinite forward and reverse gears.

The JD 8245R row-crop tractor used the John Deere PowerTech PSS engine. It is a 9.0 L, 8,980 cm2, (548.0 cu·in) six-cylinder turbocharged aftercooled diesel engine with 118.0 mm (4.65 in) of the cylinder bore and 136.0 mm (5.35 in) of the piston stroke. The compression ratio rating is 16.0:1. This engine produced 248.5 PS (182.7 kW; 245.0 HP) at 2,100 rpm of output power.

The John Deere 8245R is equipped with hydrostatic power steering, hydraulic wet disc brakes, CommandView III cab (standard) with air-conditioning and 645.0 liters (170.4 US gal.; 141.9 Imp. gal) fuel tank.

John Deere 8245R Specifications

General Specifications
ModelJohn Deere 8245R
Length6,220 mm (244.9 in)
Width3,480 mm (137 in)
Height (cab)3,280 mm (129.1 in)
Wheel base 1300: 3,080 mm (121.3 in)
1500/ILS: 3,050 mm (120.1 in)
Ground clearance (rear axle)630 mm (24.8 in)
Weight12,500 kg (27,558 lbs)
Fuel tank capacity 645.0 liters (170.4 US gal.; 141.9 Imp. gal)
G49 chassis: 685.8 liters (181.2 US gal, 150.9 Imp. gal)
Exhaust fluid (DEF)25.7 liters (6.8 US gal, 5.7 Imp. gal)
BatteryTwo 12V, CCA 925A
Cabin typeCommandView III cab (standard) with air-conditioning
Engine
Engine modelJohn Deere PowerTech PSS
Engine typeFour-stroke, liquid-cooled, inline
Cylinders6
Fuel typeDiesel
Displacement9.0 L, 8,980 cm2, (548.0 cu·in)
Bore and stroke118.0 mm X 136.0 mm (4.65 in X 5.35 in)
Compression ratio16.0:1
Horsepower248.5 PS (182.7 kW; 245 HP) at 2,100 rpm
StarterElectric
Transmission and chassis
Chassis4×4 MFWD 4WD
Steering typeHydrostatic power
BrakesHydraulic wet disc
Final driveInboard planetary
Differential lock Hydraulic rear (standard)
Hydraulic front (with 1500 and ILS axles)
Transmission modelJohn Deere PowerShift
Transmission typeFull power shift
Gears16 forward and 4 reverse
Transmission modelJohn Deere AutoPowr
Transmission typeInfinitely variable transmission (IVT)
GearsInfinite forward and reverse
Tires
Front tires Ag: 380/80R38
Rear tires Ag: 480/80R50
Three-Point Hitch
CategoryIII/IIIN or IVN/III
Control type
Lift capacity 6,350 kg (14,000 lbs)
Optional: 8,390 kg (18,500 lbs)
IVN: 9,070 kg (20,000 lbs)
Front hitch (optional)
Lift capacity 5,195 kg (11,450 lbs)
Drawbar
Category III
Optional: IV
Optional: IV Heavy-Duty
PTO (Power take-off shaft)
Front PTO typeIndependent (optional)
Front PTO speed 1000 (1.75)
1000 (1.375)
Rear PTO typeIndependent
Rear PTO speed 1000 (1.75)
1000/1000E (1.75)
540/1000 (1.375)
Hydraulic system
Hydraulic typeClosed-center load sensing pressure flow compensated
Hydraulic capacity 40.1 L (10.6 US. gal, 8.8 Imp. gal.)
Optional: 90.1 liters (23.8 US gal, 19.8 Imp. gal)
Valves Rear: 4 to 6,
Front: 0 to 2
Pump flow 60.0 gpm (227.1 lpm)
Optional: 85.0 gpm (321.8 lpm)
SCV flow 35.0 gpm (132.5 lpm)
Optional: 42.0 gpm (159.0 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*