John Deere 8410

John Deere 8410The John Deere 8410 is a 4WD row-crop tractor from the 8000 Ten series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 1999 to 2002. The John Deere 8410 is equipped with a 8.1 L (496.0 cu·in) six-cylinder diesel engine and the PowerShift transmission with 16 forward and 4 reverse gears.

The JD 8410 row-crop tractor used the John Deere engine. It is a 8.1 L, 8,128 cm2, (496.0 cu·in) six-cylinder turbocharged aftercooled diesel engine with 116.0 mm (4.57 in) of the cylinder bore and 129.0 mm (5.08 in) of the piston stroke. The compression ratio rating is 16.5:1. This engine produced 238.3 PS (175.2 kW; 235.0 HP) at 2,200 rpm of output power and 1124.1 N·m (114.6 kg·m, 828.5 ft·lb) of torque.

The John Deere 8410 is equipped with power steering, cab (standard), and 511.0 liters (135 US gal.; 112.4 Imp. gal) fuel tank.

John Deere 8410 Specifications

General Specifications
Model John Deere 8410
Length 5,240 mm (206.3 in)
Height 3,050 mm (120.1 in)
Wheel base 2,960 mm (116.5 in)
Ground clearance 580 mm (22.8 in)
Weight 9,270 kg (20,437 lbs)
Fuel tank capacity 511.0 liters (135 US gal.; 112.4 Imp. gal)
Battery Two 12V, CCA 1850A
Cabin type Cab (standard)
Engine model John Deere
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 8.1 L, 8,128 cm2, (496.0 cu·in)
Bore and stroke 116.0 mm X 129.0 mm (4.57 in X 5.08 in)
Compression ratio 16.5:1
Horsepower 238.3 PS (175.2 kW; 235.0 HP) at 2,200 rpm
Torque 1124.1 N·m (114.6 kg·m, 828.5 ft·lb)
Starter Electric
Oil capacity: 28.0 L (29.6 US. qt, 24.6 Imp. qt.)
Coolant capacity: 34.0 L (35.9 US. qt, 29.9 Imp. qt.)
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Power
Transmission model PowerShift
Transmission type
Gears 16 forward and 4 reverse
Speed Forward: 38.1 kmh (23.7 mph) Reverse: 10.6 (6.6 mph)
Front tires Ag: –
Rear tires Ag: –
Three-Point Hitch
Category III/IIIN
Control type
Lift capacity (at ends) 5,310 kg (11,700 lbs)
7,100 kg (15,650 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 1000, 540/1000 rpm
Hydraulic system
Hydraulic type Closed center PFC
Valves 3 to 5
Pump flow 30.0 gpm (113.6 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.