John Deere 8520

John Deere 8520The John Deere 8520 is a 4WD row-crop tractor from the 8020 series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 2002 to 2005. The John Deere 8520 is equipped with an 8.1 L (496.0 cu·in) six-cylinder diesel engine and a full power shift transmission with hydraulic wet disc clutch and 16 forward and 4 reverse gears.

The John Deere 8520 row-crop tractor used the John Deere engine. It is a 8.1 L, 8,128 cm2, (496.0 cu·in) six-cylinder turbocharged diesel engine with 116.0 mm (4.57 in) of the cylinder bore and 129.0 mm (5.08 in) of the piston stroke. The compression ratio rating is 16.5:1. This engine produced 339.7 PS (249.8 kW; 335.0 HP) at 2,200 rpm of maximum output power.

The JD 8520 is equipped with hydrostatic power steering, hydraulic wet disc brakes, cab (standard), and 605.6 liters (160 US gal.; 133.2 Imp. gal) fuel tank.

John Deere 8520 Specifications

General Specifications
Model John Deere 8520
Length 5,380 mm (211.8 in)
Width –
Height 3,100 mm (122 in)
Wheel base 2,980 mm (117.3 in)
Weight 10,795 kg (23,799 lbs)
Fuel tank capacity 605.6 liters (160 US gal.; 133.2 Imp. gal)
Battery Two 12V, CCA 925A
Cabin type Cab (standard)
Engine
Engine model John Deere
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 8.1 L, 8,128 cm2, (496.0 cu·in)
Bore and stroke 116.0 mm X 129.0 mm (4.57 in X 5.08 in)
Compression ratio 16.5:1
Horsepower 339.7 PS (249.8 kW; 335 HP) at 2,200 rpm
Starter Electric
Oil capacity: 30.9 L (32.7 US. qt, 27.2 Imp. qt.)
Coolant capacity: 34.0 L (35.9 US. qt, 29.9 Imp. qt.)
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Hydraulic wet disc
Front hubs 4.0 l (4.23 US.qts, 3.52 Imp. qts)
Front differential 13.4 l (14.2 US.qts, 11.8 Imp. qts)
Transmission model John Deere PowerShift
Transmission type Full power shift with hydraulic wet disc clutch
Gears 16 forward and 4 reverse
Speed Forward: 39.9 kmh (24.8 mph) Reverse: 10.9 (6.8 mph)
Transmission oil capacity 150.0 L (39.6 US. gal, 33 Imp. gal.)
Tires
Front tires Ag: –
Rear tires Ag: 18.4R46
Three-Point Hitch
Caterogy III/IIIN
Control type –
Lift capacity (at ends) 6,885 kg (15,180 lbs)
7,845 kg (17,300 lbs)
Front Hitch
Caterogy IIIN
Lift capacity (at ends) 4,990 kg (11,000 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent with hydraulic wet disc clutch
Rear PTO speed 1,000 rpm
Hydraulic system
Hydraulic type Closed center pressure-flow compensated (PFC)
Hydraulic capacity 150.0 L (158.5 US. qt, 131.98 Imp. qt.)
Pressure 2900 psi (199.9 bar)
Valves 5
Pump flow 30.0 gpm (113.6 lpm)
Total flow 33.0 gpm (125.0 lpm)
42.5 gpm (161.0 lpm)

Be the first to comment

Leave a Reply

Your email address will not be published.


*