John Deere 900HC

John Deere 900HCThe John Deere 900HC is a 2WD high-clearance tractor manufactured by John Deere in from 1986 to 1988. The John Deere 900HC is equipped with a 1.3 L (78.2 cu·in) three-cylinder diesel engine and a transmission with 8 forward and 2 reverse gears.

The JD 900HC high-clearance tractor used the John Deere engine. It is a 1.3 L, 1,281 cm2, (78.2 cu·in) three-cylinder natural aspirated diesel engine with 80.0 mm (3.15 in) of the cylinder bore and 83.0 mm (3.27 in) of the piston stroke. The compression ratio rating is 21.0:1. This engine produced 25.3 PS (18.6 kW; 25.0 HP) at 2,600 rpm of output power.

The John Deere 900HC is equipped with manual steering, dry internal expanding shoe brakes, Two-post ROPS and 32.2 liters (8.5 US gal.; 7.1 Imp. gal) fuel tank.

John Deere 900HC Specifications

General Specifications
ModelJohn Deere 900HC
Length3,200 mm (126 in)
Width1,390 mm (54.7 in)
Height (ROPS)2,450 mm (96.5 in)
Wheel base1,850 mm (72.8 in)
Ground clearance (front axle)580 mm (22.8 in)
Weight (shipping)1,300 kg (2,866 lbs)
Fuel tank capacity32.2 liters (8.5 US gal.; 7.1 Imp. gal)
Cabin typeTwo-post ROPS
Engine modelJohn Deere
Engine typeFour-stroke, liquid-cooled, inline
Fuel typeDiesel
Displacement1.3 L, 1,281 cm2, (78.2 cu·in)
Bore and stroke80.0 mm X 83.0 mm (3.15 in X 3.27 in)
Compression ratio21.0:1
Horsepower25.3 PS (18.6 kW; 25.0 HP) at 2,600 rpm
Oil capacity:4.7 L (5 US. qt, 4.1 Imp. qt.)
Coolant capacity:5.5 L (5.8 US. qt, 4.8 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD
Steering typeManual
BrakesDry internal expanding shoe
Differential lockFoot-operated
Transmission model
Transmission type
Gears8 forward and 2 reverse
Speed Forward: 18.0 kmh (11.2 mph) Reverse: 8.3 kmh (5.2 mph)
Transmission oil capacity27.9 L (7.4 US. gal, 6.1 Imp. gal.)
Front tires Ag: 5.00-15
Rear tires Ag: 11.2-28
Three-Point Hitch
Control type
Lift capacity (at 610 mm/24 in)816 kg (1,800 lbs)
PTO (Power take-off shaft)
Rear PTO typeLive with dry dual state clutch
Rear PTO speed540 rpm
Hydraulic system
Hydraulic typeOpen center
Pressure140.0 psi (9.7 bar)
Total flow3.1 gpm (11.7 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.