John Deere 9220

John Deere 9220The John Deere 9220 is a 4WD tractor from the 9020 series. This tractor was manufactured by the John Deere in Waterloo, Iowa, USA from 2002 to 2007. The JD 9220 is equipped with a 12.5 L six-cylinder diesel engine and one of two transmissions: a partial power shift transmission with 24 forward and 6 reverse gears or full power shift transmission with 18 forward and 6 reverse gears.

The JD 9220 tractor used the John Deere engine. It is a 12.5 L, 12,540 cm2, (765.0 cu·in) six-cylinder turbocharged diesel engine with 127.0 mm (5 in) of the cylinder bore and 165.0 mm (6.5 in) of the piston stroke. The compression ratio rating is 17.0:1. This engine produced 329.7 PS (242.4 kW; 325.0 HP) at 2,100 rpm of maximum output power.

The John Deere 9220 is equipped with hydrostatic articulated steering, hydraulic wet disc brakes, CommandView cab with air-conditioning and 1022.0 liters (270 US gal.; 224.8 Imp. gal) fuel tank.

John Deere 9220 Specifications

General Specifications
ModelJohn Deere 9220
Length6,950 mm (273.6 in)
Width2,930 mm (115.4 in)
Height3,490 mm (137.4 in)
Wheel base3,500 mm (137.8 in)
Weight16,558 kg (36,504 lbs)
Fuel tank capacity1022.0 liters (270 US gal.; 224.8 Imp. gal)
Battery12V, CCA 925A
Cabin typeCommandView cab with air-conditioning
Engine modelJohn Deere
Engine typeFour-stroke, liquid-cooled, inline
Fuel typeDiesel
Displacement12.5 L, 12,540 cm2, (765.0 cu·in)
Bore and stroke127.0 mm X 165.0 mm (5 in X 6.5 in)
Compression ratio17.0:1
Horsepower329.7 PS (242.4 kW; 325.0 HP) at 2,100 rpm
Oil capacity:41.6 L (44 US. qt, 36.6 Imp. qt.)
Coolant capacity:60.6 L (64 US. qt, 53.3 Imp. qt.)
Transmission and chassis
Chassis4×4 articulated 4WD
Steering typeHydrostatic articulated
BrakesHydraulic wet disc
Transmission modelJohn Deere PowerSync
Transmission typePartial power shift
Gears24 forward and 6 reverse
Speed Forward: 36.5 kmh (22.7 mph) Reverse: 11.7 (7.3 mph)
Transmission oil capacity 128.7 L (34 US. gal, 28.3 Imp. gal.)
With PTO: 132.5 L (35 US. gal, 29.1 Imp. gal.)
Transmission modelJohn Deere Powershift
Transmission typeFull power shift
Gears18 forward and 6 reverse
Speed Forward: 38.0 kmh (23.6 mph) Reverse: 12.1 (7.5 mph)
Front tiresAg: 620/70R42
Rear tiresAg: 620/70R42
Three-Point Hitch
CaterogyIII or IV/IVN
Control type
Lift capacity (at ends) 6,290 kg (13,869 lbs)
6,552 kg (14,445 lbs)
PTO (Power take-off shaft)
Rear PTO typeIndependent
Rear PTO spped1,000 rpm
Hydraulic system
Hydraulic typeClosed center pressure / flow compensated
Hydraulic capacity 102.2 L (27.0 US gal, 22.5 Imp. gal)
With 3pt: 106.0 L (28.0 US gal, 23.3 Imp. gal)
Hi-flow: 113.6 L (30.0 US gal, 25.0 Imp. gal)
Hi-flow with 3pt: 117.3 L (31.0 US gal, 25.8 Imp. gal)
Pressure2,900 psi (200 bar)
Valves4 or 5
Pump flow30.0 gpm (113.6 lpm)
Total flow44.0 gpm (166.6 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.