John Deere MC

John Deere MCThe John Deere MC is a agricultural crawler from the Two-Cylinder Letter series. This tractor was manufactured by John Deere in Dubuque, Iowa, USA from 1949 to 1952. The John Deere MC is equipped with a 1.6 L (100.5 cu·in) two-cylinder gasoline engine and a unsynchronized gear transmission with 4 forward and 1 reverse gears.

The John Deere MC agricultural crawler used the John Deere engine. It is a 1.6 L, 1,647 cm2, (100.5 cu·in) two-cylinder natural aspirated gasoline engine with 102.0 mm (4.02 in) of the cylinder bore and 102.0 mm (4.02 in) of the piston stroke. The compression ratio rating is 6.0:1. This engine produced 17.7 PS (13.0 kW; 17.4 HP) of output power.

The John Deere MC is equipped with differential mechanical disc brakes, an open operator station, and 37.9 liters (10 US gal.; 8.3 Imp. gal) fuel tank.

John Deere MC Specifications

General Specifications
Model John Deere MC
Length 2,590 mm (102 in)
Width 1,700 mm (66.9 in)
Height 1,620 mm (63.8 in)
Wheel base –
Ground clearance 350 mm (13.8 in)
Weight 1,880 kg (4,145 lbs)
Fuel tank capacity 37.9 liters (10 US gal.; 8.3 Imp. gal)
Battery 6V
Cabin type Open operator station
Engine
Engine model John Deere
Engine type Four-stroke, liquid-cooled, inline
Cylinders 2
Fuel type Gasoline
Displacement 1.6 L, 1,647 cm2, (100.5 cu·in)
Bore and stroke 102.0 mm X 102.0 mm (4.02 in X 4.02 in)
Compression ratio 6.0:1
Horsepower (drawbar) 17.7 PS (13.0 kW; 17.4 HP)
Starter Electric
Oil capacity: 4.7 L (5 US. qt, 4.1 Imp. qt.)
Transmission and chassis
Chassis Crawler
Steering type –
Brakes Differential mechanical disc
Transmission model –
Transmission type Unsynchronized gear
Gears 4 forward and 1 reverse
Speed Forward: 7.6 kmh (4.7 mph) Reverse: 1.6 kmh (1 mph)
Transmission oil capacity 7.1 L (1.9 US. gal, 1.6 Imp. gal.)
Tracks
Size 10, 12, 14-inch
PTO (Power take-off shaft)
Rear PTO type –
Rear PTO speed 550 rpm
Hydraulic system
Hydraulic type –
Hydraulic capacity 10.4 L (2.7 US. gal, 2.3 Imp. gal.)
Pressure 600 psi (41.4 bar)
Valves 1
Pump flow 4.25 gpm (16.1 lpm)

Be the first to comment

Leave a Reply

Your email address will not be published.


*