John Deere MT

John Deere MTThe John Deere MT is a 2WD row-crop tractor from the Two-Cylinder Letter series. This tractor was manufactured by John Deere in Dubuque, Iowa, USA from 1949 to 1952. The John Deere MT is equipped with a 1.6 L (100.5 cu·in) two-cylinder gasoline engine and unsynchronized gear transmission with 4 forward and 1 reverse gears.

The JD MT row-crop tractor used the John Deere engine. It is a 1.6 L, 1,647 cm2, (100.5 cu·in) two-cylinder natural aspirated gasoline engine with 102.0 mm (4.02 in) of the cylinder bore and 102.0 mm (4.02 in) of the piston stroke. The compression ratio rating is 6.0:1. This engine produced 14.3 PS (10.5 kW; 14.1 HP) at 1,650 rpm of output power.

The John Deere MT is equipped with manual steering, differential mechanical drum brakes, an open operator station, and 34.0 liters (9 US gal.; 7.5 Imp. gal) fuel tank.

John Deere MT Specifications

General Specifications
Model John Deere MT
Length 3,180 mm (125.2 in)
Width 2,270 mm (89.4 in)
Height 1,490 mm (58.7 in)
Wheel base
Weight (operating) 1,445 kg (3,186 lbs)
Fuel tank capacity 34.0 liters (9 US gal.; 7.5 Imp. gal)
Battery 6V
Cabin type Open operator station
Engine
Engine model John Deere
Engine type Four-stroke, liquid-cooled, inline
Cylinders 2
Fuel type Gasoline
Displacement 1.6 L, 1,647 cm2, (100.5 cu·in)
Bore and stroke 102.0 mm X 102.0 mm (4.02 in X 4.02 in)
Compression ratio 6.0:1
Horsepower (drawbar) 14.3 PS (10.5 kW; 14.1 HP) at 1,650 rpm
Starter Electric
Oil capacity: 4.7 L (5 US. qt, 4.1 Imp. qt.)
Coolant capacity: 13.2 L (13.9 US. qt, 11.6 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD
Steering type Manual
Brakes Differential mechanical drum
Transmission model John Deere
Transmission type Unsynchronized gear
Gears 4 forward and 1 reverse
Speed Forward: 19.3 kmh (12 mph) Reverse: 2.8 kmh (1.7 mph)
Tires
Front tires Ag: 5.00-15
Rear tires Ag: 9-34
PTO (Power take-off shaft)
Rear PTO type
Rear PTO speed 550 rpm
Hydraulic system
Hydraulic type Touch-O-Matic
Hydraulic capacity 700 L (184.9 US. gal, 154 Imp. gal.)
Total flow 4.25 gpm (16.1 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*