John Deere 2950

John Deere 2950The John Deere 2950 is a 2WD or 4WD utility tractor from the 2050 series. This tractor was manufactured by John Deere in Mannheim, Baden-Württemberg, Germany from 1983 to 1988. The John Deere 2950 is equipped with a 5.9 L (359.0 cu·in) six-cylinder diesel engine and one of two transmissions: a partial power shift transmission with 16 forward and 8 reverse gears or a partially synchronized transmission with 12 forward and 8 reverse gears.

The John Deere 2950 utility tractor used the John Deere engine. It is a 5.9 L, 5,883 cm2, (359.0 cu·in) six-cylinder natural aspirated diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 17.4:1. This engine produced 86.2 PS (63.4 kW; 85.0 HP) at 2,500 rpm of PTO output power.

The JD 2950 is equipped with power steering, differential hydraulic wet disc brakes, two-post ROPS (canopy or Sound-Gard cab with heat and air-conditioning was available as an option), and 122.3 liters (32.3 US gal.; 26.9 Imp. gal) fuel tank.

Following attachments are available for the JD 2950 utility tractor:

  • John Deere 148 loader
  • John Deere 260 loader
  • John Deere 265 loader

John Deere 2950 Specifications

General Specifications
ModelJohn Deere 2950
Length3,890 mm (153.1 in)
Height (Cab)2,700 mm (106.3 in)
Wheel base 2WD: 2,550 mm (100.4 in)
4WD: 2,580 mm (101.6 in)
Weight (ballasted)5,010 kg (11,045 lbs)
Fuel tank capacity122.3 liters (32.3 US gal.; 26.9 Imp. gal)
Cabin typeTwo-post ROPS, Canopy or Sound-Gard cab with heat and air-conditioning
Engine modelJohn Deere
Engine typeFour-stroke, liquid-cooled, inline
Fuel typeDiesel
Displacement5.9 L, 5,883 cm2, (359.0 cu·in)
Bore and stroke106.0 mm X 110.0 mm (4.17 in X 4.33 in)
Compression ratio17.4:1
Horsepower86.2 PS (63.4 kW; 85.0 HP) at 2,500 rpm
Coolant capacity:18.9 L (20 US. qt, 16.6 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD or 4×4 MFWD 4WD
Steering typePower
BrakesDifferential hydraulic wet disc
Differential lockRear standard
Transmission modelJohn Deere Hi-Lo TSS
Transmission typePartial power shift
Gears16 forward and 8 reverse
Speed Forward: 27.9 kmh (17.3 mph) Reverse: 12.5 (7.8 mph)
Transmission modelJohn Deere TSS Creeper
Transmission typePartially synchronized
Gears12 forward and 8 reverse
Speed Forward: 27.9 kmh (17.3 mph) Reverse: 12.5 (7.8 mph)
Front tiresAg: 10.00-16 (2WD), 13.6-24.8 (4WD)
Rear tiresAg: 18.4-34
Three-Point Hitch
Control typeLoad and depth control
Lift capacity (at ends)2,210 kg (4,875 lbs)
PTO (Power take-off shaft)
Rear PTO typeIndependent
Rear PTO speed540/1,000 rpm
Hydraulic system
Hydraulic typeClosed center
Pump flow23.0 gpm (87.1 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.