Mahindra 1526

Mahindra 1526The Mahindra 1526 is a 4WD compact utility tractor from the 1500 series. This tractor was manufactured by the Mitsubishi for Mahindra from 2016 to 2018. The Mahindra 1526 is equipped with a 1.3 L three-cylinder diesel engine and one of two transmissions: constant-mesh transmission with dry single disc clutch (8 forward and 8 reverse gears) or hydrostatic transmission (infinite 3-range forward and reverse).

The Mahindra 1526 compact utility tractor used the Mitsubishi S3L2 engine. It is a 1.3 L, 1,318 cm2, (80.4 cu·in) three-cylinder natural aspirated diesel engine with 78.0 mm (3.07 in) of the cylinder bore and 92.0 mm (3.62 in) of the piston stroke. The compression ratio rating is 22.0:1. This engine produced 25.8 PS (19.0 kW; 25.5 HP) at 2,500 rpm of maximum output power. The PTO output power is 19.3 PS (14.2 KW; 19.0 HP) for the shuttle transmission and 8.8 PS (13.8 KW; 18.5 HP) for hydrostatic transmission.

The Mahindra 1526 is equipped with hydraulic power steering, wet disc brakes, open operator station with two-post ROPS and 27.0 liters (7.1 US gal.; 5.9 Imp. gal) fuel tank.

Following attachments are available for Mahindra 1526 utility tractor:

  • Mahindra 1526L loader
  • Mahindra 1526B backhoe

Mahindra 1526 Specifications

General Specifications
Model Mahindra 1526
Length 3,080 mm (121.3 in)
Width 1,600 mm (63 in)
Height 2,070 mm (81.5 in)
Wheel base
Weight Shuttle: 1,105 kg (2,436 lbs)
HST: 1,115 kg (2,460 lbs)
Fuel tank capacity 27.0 liters (7.1 US gal.; 5.9 Imp. gal)
Battery 12V, 46Ah, CCA 540A
Cabin type Open operator station with two-post ROPS
Engine
Engine model Mitsubishi S3L2
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 1.3 L, 1,318 cm2, (80.4 cu·in)
Bore and stroke 78.0 mm X 92.0 mm (3.07 in X 3.62 in)
Compression ratio 22.0:1
Horsepower 25.8 PS (19.0 kW; 25.5 HP) at 2,500 rpm
Starter Electric
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Hydraulic power
Brakes Wet disc
Transmission model
Transmission type Constant mesh
Gears 8 forward and 8 reverse
Transmission model
Transmission type Hydrostatic
Gears Infinite (3-range) forward and reverse
Tires
Front tires Ag: 7×16
Lawn/turf: 25×8.5-14
Industrial: 27×8.5-15
Rear tires Ag:11.2×24
Lawn/turf: 13.6×16
Industrial: 15×19.5
Three-Point Hitch
Caterogy I
Control type Position control
Lift capacity 1,200 kg (2,646 lbs)
PTO (Power take-off shaft)
Middle PTO type
Middle PTO spped 2,000 rpm
Rear PTO type Independent (shuttle) or live (hydrostatic)
Rear PTO spped 540 rpm
Hydraulic system
Hydraulic type Open center
Valves 1 (optional)
Pump flow 7.5 gpm (28.4 lpm)
Total flow 10.8 gpm (40.9 lpm)
Steering flow 3.3 gpm (12.5 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*