Mahindra 1533

Mahindra 1533The Mahindra 1533 is a 4WD compact utility tractor from the 1500 series. This tractor was manufactured by the Mitsubishi for Mahindra in from 2016 to 2018. The Mahindra 1533 is equipped with a 2.7 L four-cylinder diesel engine and one of two transmissions: constant-mesh transmission with dry single disc clutch (8 forward and 8 reverse gears) or hydrostatic transmission (infinite 3-range forward and reverse).

The Mahindra 1533 compact utility tractor used the Mahindra engine. It is a 2.7 L, 2,732 cm2, (166.7 cu·in) four-cylinder natural aspirated diesel engine with 89.0 mm (3.5 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 19.5:1. This engine produced 35 PS (25.7 kW; 34.5 HP) at 2,400 rpm of gross horsepower. The PTO output power is 25.6 PS (18.8 KW; 25.2 HP) for the shuttle transmission and 25.0 PS (18.4 KW; 24.7 HP) for hydrostatic transmission.

The Mahindra 1533 is equipped with hydraulic power steering, wet disc brakes, open operator station with two-post ROPS and 29.0 liters (7.7 US gal.; 6.4 Imp. gal) fuel tank.

Following attachments are available for Mahindra 1533 compact utility tractor:

  • Mahindra 1526L loader
  • Mahindra 1526B backhoe

Mahindra 1533 Specifications

General Specifications
Model Mahindra 1533
Length 3,240 mm (127.6 in)
Width 1,600 mm (63 in)
Height 2290 mm (90.2 in)
Wheel base
Weight Shuttle: 1,440 kg (3,175 lbs)
HST: 1,435 kg (3,164 lbs)
Fuel tank capacity 29.0 liters (7.7 US gal.; 6.4 Imp. gal)
Battery 12V, 46Ah
Cabin type Open operator station with two-post ROPS
Engine
Engine model Mahindra
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 2.7 L, 2,732 cm2, (166.7 cu·in)
Bore and stroke 89.0 mm X 110.0 mm (3.5 in X 4.33 in)
Compression ratio 19.5:1
Horsepower 35 PS (25.7 kW; 34.5 HP) at 2,400 rpm
Starter Electric
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Hydraulic power
Brakes Wet disc
Transmission model
Transmission type Constant mesh
Gears 8 forward and reverse
Transmission model
Transmission type Hydrostatic
Gears Infinite (3-range) forward and reverse
Tires
Front tires Ag: 7×16
Lawn/turf: 25×8.5-14
Industrial: 27×8.5-15
Rear tires Ag:11.2×24
Lawn/turf: 13.6×16
Industrial: 15×19.5
Three-Point Hitch
Caterogy I
Control type Position control
Lift capacity 1,200 kg (2,646 lbs)
PTO (Power take-off shaft)
Middle PTO type
Middle PTO spped 2,000 rpm
Rear PTO type Independent (shuttle) or live (hydrostatic)
Rear PTO spped 540 rpm
Hydraulic system
Hydraulic type Open center
Valves 1 (optional)
Pump flow 7.7 gpm (29.1 lpm)
Total flow 11.1 gpm (42 lpm)
Steering flow 3.4 gpm (12.9 lpm)