Mahindra 2615

Mahindra 2615The Mahindra 2615 is a 4WD compact utility tractor from the 15 series. This tractor was manufactured by the Mitsubishi for Mahindra in from 2003 to 2008. The Mahindra 2615 is equipped with a 1.3 L three-cylinder diesel engine and one of two transmissions: constant-mesh transmission with dry single disc clutch (9 forward and 3 reverse gears) or hydrostatic transmission (infinite 3-range forward and reverse).

The Mahindra 2615 compact utility tractor used the Mitsubishi S3L2 engine. It is a 1.3 L, 1,318 cm2, (80.4 cu·in) three-cylinder natural aspirated diesel engine with 78.0 mm (3.07 in) of the cylinder bore and 92.0 mm (3.62 in) of the piston stroke. The compression ratio rating is 22?0:1. This engine produced 26.4 PS (19.4 kW; 26.0 HP) at 2,500 rpm of gross horsepower. The PTO output power is 23.4 PS (17.2 KW; 23.1 HP) for the shuttle transmission and 21.4 PS (15.7 KW; 21.1 HP) for hydrostatic transmission.

The Mahindra 2615 is equipped with hydraulic power steering, wet disc brakes and open operator station with two-post ROPS.

Following attachments are available for Mahindra 2615 compact utility tractor:

  • Mahindra ML106 loader
  • Mid-mount Mahindra 1526B 72 in (1,820 mm) mower deck

Mahindra 2615 Specifications

General Specifications
Model Mahindra 2615
Length 2,920 mm (115 in)
Width 1,500 mm (59.1 in)
Height
Wheel base
Weight Shuttle: 1,050 kg (2,315 lbs)
HST: 1,114 kg (2,458 lbs)
Fuel tank capacity
Battery 12V, 46Ah
Cabin type Open operator station with two-post ROPS
Engine
Engine model Mitsubishi S3L2
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 1.3 L, 1,318 cm2, (80.4 cu·in)
Bore and stroke 78.0 mm X 92.0 mm (3.07 in X 3.62 in)
Compression ratio 22.0:1
Horsepower 26.4 PS (19.4 kW; 26.0 HP) at 2,500 rpm
Starter Electric
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Hydraulic power
Brakes Wet disc
Transmission model
Transmission type Constant mesh
Gears 9 forward and 3 reverse
Transmission model
Transmission type Hydrostatic
Gears Infinite (3-range) forward and reverse
Tires
Front tires Ag: 7×16
Lawn/turf: 25×8.5-14
Industrial: 27×8.5-15
Rear tires Ag:11.2×24
Lawn/turf: 13.6×16
Industrial: 15×19.5
Three-Point Hitch
Caterogy I
Control type Position control
Lift capacity 1,000 kg (2,205 lbs)
PTO (Power take-off shaft)
Middle PTO type
Middle PTO spped 2,000 rpm
Rear PTO type Independent (shuttle) or live (hydrostatic)
Rear PTO spped 540 rpm
Hydraulic system
Hydraulic type Open center
Valves 1 (optional)
Pump flow 7.8 gpm (29.5 lpm)
Total flow 11.3 gpm (42.8 lpm)
Steering flow 3.5 gpm (13.2 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*