Mahindra 2816

Mahindra 2816The Mahindra 2816 is a 4WD compact utility tractor from the 16 series. This tractor was manufactured by Mitsubishi for Mahindra from 2008 to 2010. The Mahindra 2816 is equipped with a 1.3 L (80.4 cu·in) three-cylinder diesel engine and one of two transmissions: a hydrostatic transmission with infinite (3-range) forward and reverse gears or a gear type transmission with 9 forward and 3 reverse gears.

The Mahindra 2816 compact utility tractor used the Mitsubishi S3L2 engine. It is a 1.3 L, 1,318 cm2, (80.4 cu·in) three-cylinder natural aspirated diesel engine with 78.0 mm (3.07 in) of the cylinder bore and 92.0 mm (3.62 in) of the piston stroke. The compression ratio rating is 22.0:1. This engine produced 28.4 PS (20.9 kW; 28.0 HP) at 2,500 rpm of maximum output power.

The Mahindra 2816 is equipped with hydrostatic power steering, wet disc brakes, two-post foldable ROPS and 30.0 liters (7.9 US gal.; 6.6 Imp. gal) fuel tank. This tractor could be equipped with the Mahindra ML106 loader.

Mahindra 2816 Specifications

General Specifications
Model Mahindra 2816
Length 2,920 mm (115 in)
Width 1,380 mm (54.3 in)
Height 2,140 mm (84.3 in)
Wheel base 1,650 mm (65 in)
Ground clearance 330 mm (13 in)
Weight Gear: 1,050 kg (2,315 lbs)
Hydro: 1,115 kg (2,460 lbs)
Fuel tank capacity 30.0 liters (7.9 US gal.; 6.6 Imp. gal)
Battery 12V 46Ah
Cabin type Two-post foldable ROPS
Engine
Engine model Mitsubishi S3L2
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 1.3 L, 1,318 cm2, (80.4 cu·in)
Bore and stroke 78.0 mm X 92.0 mm (3.07 in X 3.62 in)
Compression ratio 22.0:1
Horsepower 28.4 PS (20.9 kW; 28.0 HP) at 2,500 rpm
Starter Electric
Oil type API: CD, SAE: 10W-30
Oil capacity: 4.2 L (4.4 US. qt, 3.7 Imp. qt.)
Coolant capacity: 7.1 L (7.5 US. qt, 6.2 Imp. qt.)
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Wet disc
Transmission model
Transmission type Hydrostatic
Gears Infinite (3-range) forward and reverse
Transmission oil capacity 22.0 L (5.8 US. gal, 4.8 Imp. gal.)
Transmission model
Transmission type Gear type
Gears 9 forward and 3 reverse
Tires
Front tires Ag: 7×16
Rear tires Ag: 11.2×24
Three-Point Hitch
Caterogy I
Control type Position control
Lift capacity (at ends) 1,000 kg (2,205 lbs)
PTO (Power take-off shaft)
Middle PTO type
Middle PTO speed 2,000 rpm
Rear PTO type Live
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 22.0 L (23.25 US. qt, 19.36 Imp. qt.)
Valves 0 or 1
Pump flow 7.8 gpm (29.5 lpm)
Steering flow 3.5 gpm (13.2 lpm)
Total flow 11.3 gpm (42.8 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*