Mahindra 3016

Mahindra 3016The Mahindra 3016 is a 4WD compact utility tractor from the 16 series. This tractor has been manufactured by the Mitsubishi for Mahindra since 2011. The Mahindra 3016 is equipped with a 1.3 L three-cylinder diesel engine and one of two transmissions: a synchronized shuttle transmission with dry disc clutch and 8 forward and 8 reverse gears or hydrostatic transmission with infinite (3-range) forward and reverse gears.

The Mahindra 3016 compact utility tractor used the Mitsubishi engine. It is a 1.3 L, 1,317 cm2, (80.4 cu·in) three-cylinder natural aspirated diesel engine with 78.0 mm (3.07 in) of the cylinder bore and 92.0 mm (3.62 in) of the piston stroke. The compression ratio rating is 22.0:1. This engine produced 28.4 PS (20.9 kW; 28.0 HP) at 2,600 rpm of maximum output power.

The Mahindra 3016 is equipped with hydrostatic power steering, wet disc brakes, open operator station with two-post ROPS and 27.0 liters (7.1 US gal.; 5.9 Imp. gal) fuel tank.

Following attachments are available for the Mahindra 3016 compact utility tractor:

  • Mahindra ML115 loader
  • Mahindra 3715 backhoe

Mahindra 3016 Specifications

General Specifications
Model Mahindra 3016
Length 3,080 mm (121.3 in)
Width 1,510 mm (59.4 in)
Height
Wheel base
Weight Shuttle: 1,105 kg (2,436 lbs)
Hydro: 1,115 kg (2,459 lbs)
Fuel tank capacity 27.0 liters (7.1 US gal.; 5.9 Imp. gal)
Battery 12V, 46Ah
Cabin type Open operator station with two-post ROPS
Engine
Engine model Mitsubishi
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 1.3 L, 1,317 cm2, (80.4 cu·in)
Bore and stroke 78.0 mm X 92.0 mm (3.07 in X 3.62 in)
Compression ratio 22.0:1
Horsepower 28.4 PS (20.9 kW; 28.0 HP) at 2,600 rpm
Starter Electric
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Wet disc
Transmission model
Transmission type Synchronized shuttle with dry disc clutch
Gears 8 forward and 8 reverse
Transmission model
Transmission type Hydrostatic
Gears Infinite (3-range) forward and reverse
Tires
Front tires Ag: 7×16
Lawn/turf: 25×8.5-14
Industrial: 27×8.5-15
Rear tires Ag: 11.2×24
Lawn/turf: 13.6×16
Industrial: 15×19.5
Three-Point Hitch
Caterogy I
Control type Position control
Lift capacity (at ends) 1,200 kg (2,646 lbs)
PTO (Power take-off shaft)
Middle PTO type Optional
Middle PTO spped 2,000 rpm
Rear PTO type Independent (shuttle) or live (hydrostatic)
Rear PTO spped 540 rpm
Hydraulic system
Hydraulic type Open center
Valves 1
Pump flow 7.8 gpm (29.5 lpm)
Steering flow 3.4 gpm (12.9 lpm)
Total flow 11.2 gpm (42.4 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*