The Mahindra 4035 is a 4WD compact utility tractor from the 35 series. This tractor was manufactured by Mahindra in Maharashtra, India from 2009 to 2019. The Mahindra 4035 is equipped with a 1.9 L (115.4 cu·in) three-cylinder diesel engine and one of three transmissions: a synchro shuttle transmission with dry disc clutch and 12 forward and 12 reverse gears, a power shuttle transmission with wet disc clutch and 12 forward and 12 reverse gears or a hydrostatic transmission with infinite (3-range) forward and reverse gears.
The Mahindra 4035 compact utility tractor used the Mahindra CE40 engine. It is a 1.9 L, 1,891 cm2, (115.4 cu·in) three-cylinder natural aspirated diesel engine with 89.0 mm (3.5 in) of the cylinder bore and 102.0 mm (4.02 in) of the piston stroke. The compression ratio rating is 19.4:1. This engine produced 40.5 PS (29.8 kW; 40.0 HP) at 2,800 rpm of output power.
The Mahindra 4035 is equipped with hydrostatic power steering, wet disc brakes, two-post foldable ROPS and 43.0 liters (11.4 US gal.; 9.5 Imp. gal) fuel tank.
Following attachments are available for the Mahindra 4035 compact utility tractor:
- Mahindra ML120 loader
- Mahindra 485 backhoe
Mahindra 4035 Specifications
| General Specifications | |
| Model | Mahindra 4035 |
| Length | 3,140 mm (123.6 in) |
| Width | 1,870 mm (73.6 in) |
| Height | 2,506 mm (98.7 in) |
| Wheel base | 1,800 mm (70.9 in) |
| Weight |
Gear: 1,980 kg (4,365 lbs) Hydro: 2,185 kg (4,815 lbs) |
| Fuel tank capacity | 43.0 liters (11.4 US gal.; 9.5 Imp. gal) |
| Battery | 12V, 96Ah |
| Cabin type | Two-post foldable ROPS |
| Engine | |
| Engine model | Mahindra CE40 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 1.9 L, 1,891 cm2, (115.4 cu·in) |
| Bore and stroke | 89.0 mm X 102.0 mm (3.5 in X 4.02 in) |
| Compression ratio | 19.4:1 |
| Horsepower | 40.5 PS (29.8 kW; 40.0 HP) at 2,800 rpm |
| Starter | Electric |
| Oil capacity: | 6.0 L (6.3 US. qt, 5.3 Imp. qt.) |
| Coolant capacity: | 7.0 L (7.4 US. qt, 6.2 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Hydrostatic power |
| Brakes | Wet disc |
| Transmission model | – |
| Transmission type | Synchro shuttle with dry disc clutch |
| Gears | 12 forward and 12 reverse |
| Transmission model | – |
| Transmission type | Power shuttle with wet disc clutch |
| Gears | 12 forward and 12 reverse |
| Transmission model | – |
| Transmission type | Hydrostatic |
| Gears | Infinite (3-range) forward and reverse |
| Tires | |
| Front tires | Ag: 9.5-16 |
| Rear tires | Ag: 14.9-24 |
| Three-Point Hitch | |
| Caterogy | I |
| Control type | – |
| Lift capacity (at ends) | 1,400 kg (3,090 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO speed | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Pressure | 2970 psi (204.8 bar) |
| Valves | 0 to 2 |
| Pump flow | 11.0 gpm (41.6 lpm) |
| Steering flow | 5.0 gpm (18.9 lpm) |
Be the first to comment