The Mahindra 4110 is a 4WD compact utility tractor from the 10 series. This tractor was manufactured by TYM for Mahindra in South Korea from 2002 to 2009. The Mahindra 4110 is equipped with a 2.0 L (122.0 cu·in) four-cylinder diesel engine and a synchromesh shuttle transmission with dry disc clutch and 12 forward and 12 reverse gears.
The Mahindra 4110 compact utility tractor used the Daedong 4A200 engine. It is a 2.0 L, 1,999 cm2, (122.0 cu·in) four-cylinder natural aspirated diesel engine with 83.0 mm (3.27 in) of the cylinder bore and 92.4 mm (3.64 in) of the piston stroke. The compression ratio rating is 22.0:1. This engine produced 41.6 PS (30.6 kW; 41.0 HP) at 2,700 rpm of maximum output power.
The Mahindra 4110 is equipped with hydrostatic power steering, wet disc brakes, two-post foldable ROPS and 35.0 liters (9.2 US gal.; 7.7 Imp. gal) fuel tank.
Mahindra 4110 Specifications
| General Specifications | |
| Model | Mahindra 4110 |
| Length | 3,530 mm (139 in) |
| Width | 1,490 mm (58.7 in) |
| Height | – |
| Wheel base | -/td> |
| Weight | 1,800 kg (3,968 lbs) |
| Fuel tank capacity | 35.0 liters (9.2 US gal.; 7.7 Imp. gal) |
| Battery | 12V, 110Ah |
| Cabin type | Two-post foldable ROPS |
| Engine | |
| Engine model | Daedong 4A200 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Diesel |
| Displacement | 2.0 L, 1,999 cm2, (122.0 cu·in) |
| Bore and stroke | 83.0 mm X 92.4 mm (3.27 in X 3.64 in) |
| Compression ratio | 22.0:1 |
| Horsepower | 41.6 PS (30.6 kW; 41.0 HP) at 2,700 rpm |
| Starter | Electric |
| Oil capacity: | 7.0 L (7.4 US. qt, 6.2 Imp. qt.) |
| Coolant capacity: | 8.5 L (9 US. qt, 7.5 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Hydrostatic power |
| Brakes | Wet disc |
| Transmission model | – |
| Transmission type | Synchomesh shuttle with dry disc clutch |
| Gears | 12 forward and 12 reverse |
| Transmission oil capacity | 29.0 L (7.7 US. gal, 6.4 Imp. gal.) |
| Tires | |
| Front tires | Ag: 8-16 |
| Rear tires | Ag: 13.6-24 |
| Three-Point Hitch | |
| Caterogy | I |
| Control type | Position control |
| Lift capacity (at ends) | 1,300 kg (2,870 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent with electro-hydraulic clutch |
| Rear PTO speed | 540/1,000 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Valves | 1 |
| Pump flow | 7.87 gpm (29.8 lpm) |
| Steering flow | 4.65 gpm (17.6 lpm) |
Be the first to comment