Mahindra 4540

Mahindra 4540The Mahindra 4540 is a 2WD or 4WD utility tractor from the 4500 series. This tractor has been manufactured by the Mahindra since 2014. The Mahindra 4540 is equipped with a 2.7 L four-cylinder diesel engine and gear type transmission with dry disc clutch and 8 forward and 2 reverse gears.

The Mahindra 4540 utility tractor used the Mahindra engine. It is a 2.7 L, 2,732 cm2, (166.7 cu·in) four-cylinder natural aspirated diesel engine with 89.0 mm (3.5 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. It is a Tier IV, direct injection motor with 18.7:1 of compression ratio rating. This engine produced 41.6 PS (30.6 kW; 41 HP) at 2,300 rpm of max horsepower.

The Mahindra 4540 is equipped with hydrostatic power steering, dry disc brakes, open operator station with two-post ROPS and 55.0 liters (14.5 US gal.; 12.1 Imp. gal) fuel tank.

Following attachments are available for Mahindra 4540 utility tractor:

  • Mahindra 4550-2L loader
  • Mahindra 4550-4L loader
  • Mahindra 4550B backhoe

Mahindra 4540 Specifications

General Specifications
ModelMahindra 4540
Length 2WD: 2,920 mm (115 in)
4WD: 3,270 mm (129 in)
Width 2WD: 1,760 mm (69.3 in)
4WD: 2,090 mm (82.6 in)
Height 2WD: 2,230 mm (87.8 in)
4WD: 2,350 mm (92.6 in)
Wheel base
Weight 2WD: 1,900 kg (4,189 lbs)
4WD: 2,355 kg (5,192 lbs)
Fuel tank capacity55.0 liters (14.5 US gal.; 12.1 Imp. gal)
Battery12V, 96Ah
Cabin typeOpen operator station with two-post ROPS
Engine
Engine modelMahindra
Engine typeFour-stroke, liquid-cooled, inline
Cylinders4
Fuel typeDiesel
Displacement2.7 L, 2,732 cm2, (166.7 cu·in)
Bore and stroke89.0 mm X 110.0 mm (3.5 in X 4.33 in)
Compression ratio18.7:1
Horsepower41.6 PS (30.6 kW; 41 HP) at 2,300 rpm
StarterElectric
Transmission and chassis
Chassis4×2 2WD or 4×4 MFWD 4WD
Steering typeHydrostatic power
BrakesDry disc
Transmission model
Transmission typeGear type with dry disc clutch
Gears8 forward and 2 reverse
Tires
Front tires Ag: 6×16 (2WD), 9.5×16 (4WD)
Industrial: 12.6×16.5
Rear tires Ag: 12.4×28
Industrial: 16.9×24
Three-Point Hitch
CaterogyII/I
Control typePosition and draft control
Lift capacity1,600 kg (3,528 lbs)
PTO (Power take-off shaft)
Rear PTO typeLive with dual-stage clutch
Rear PTO spped540 rpm
Hydraulic system
Hydraulic typeOpen center
Valves0 or 1
Total flow8.7 gpm (32.9 lpm)
Steering flow5.8 gpm (22 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*