Mahindra 4550

Mahindra 4550The Mahindra 4550 is a 2WD or 4WD utility tractor from the 4500 series. This tractor has been manufactured by the Mahindra since 2014. The Mahindra 4550 is equipped with a 2.7 L four-cylinder diesel engine and gear type transmission with dry disc clutch and 8 forward and 2 reverse gears.

The Mahindra 4550 utility tractor used the Mahindra engine. It is a 2.7 L, 2,732 cm2, (166.7 cu·in) four-cylinder natural aspirated diesel engine with 89.0 mm (3.5 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. It is a Tier IV, direct injection motor with 18.7:1 of compression ratio rating. This engine produced 48.7 PS (35.8 kW; 48.0 HP) at 2,300 rpm of maximum output power.

The Mahindra 4550 is equipped with hydrostatic power steering, dry disc brakes, open operator station with two-post ROPS and 55.0 liters (14.5 US gal.; 12.1 Imp. gal) fuel tank.

Following attachments are available for Mahindra 4550 utility tractor:

  • Mahindra 4550-2L loader
  • Mahindra 4550-4L loader
  • Mahindra 4550B backhoe

Mahindra 4550 Specifications

General Specifications
Model Mahindra 4550
Length 2WD: 3,030 mm (119.3 in)
4WD: 3,220 mm (127.0 in)
Width 2WD: 1,790 mm (70.5 in)
4WD: 1,860 mm (73.6 in)
Height 2WD: 2,340 mm (92.1 in)
4WD: 2,370 mm (93.7 in)
Wheel base
Weight 2WD: 1,935 kg (4,266 lbs)
4WD: 2,400 kg (5,292 lbs)
Fuel tank capacity 55.0 liters (14.5 US gal.; 12.1 Imp. gal)
Battery 12V, 96Ah
Cabin type Open operator station with two-post ROPS
Engine
Engine model Mahindra
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 2.7 L, 2,732 cm2, (166.7 cu·in)
Bore and stroke 89.0 mm X 110.0 mm (3.5 in X 4.33 in)
Compression ratio 18.7:1
Horsepower 48.7 PS (35.8 kW; 48.0 HP) at 2,300 rpm
Starter Electric
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Dry disc
Transmission model
Transmission type Gear type with dry disc clutch
Gears 8 forward and 2 reverse
Tires
Front tires Ag: 6×16 (2WD), 9.5×16 (4WD)
Industrial: 12.6×16.5
Rear tires Ag: 12.4×28
Industrial: 16.9×24
Three-Point Hitch
Caterogy II/I
Control type Position and draft control
Lift capacity 1,600 kg (3,528 lbs)
PTO (Power take-off shaft)
Rear PTO type Live with dual-stage clutch
Rear PTO spped 540 rpm
Hydraulic system
Hydraulic type Open center
Valves 1
Total flow 8.7 gpm (32.9 lpm)
Steering flow 5.0 gpm (18.9 lpm)