The Mahindra 6075 is a 4WD utility tractor. This tractor has been manufactured by Mahindra since 2018. The Mahindra 6075 is equipped with a 2.6 L (161.6 cu·in) three-cylinder diesel engine and a power shuttle transmission with 15 forward and 15 reverse gears.
The Mahindra 6075 utility tractor used the Mahindra engine. It is a 2.6 L, 2,648 cm2, (161.6 cu·in) three-cylinder turbocharged diesel engine with 96.0 mm (3.78 in) of the cylinder bore and 122.0 mm (4.8 in) of the piston stroke. This engine produced 71.9 PS (52.9 kW; 71.0 HP) of output power.
The Mahindra 6075 is equipped with power steering, wet disc brakes, two-post folding ROPS, or Cab with air-conditioning (optional), and 90.0 liters (23.8 US gal.; 19.8 Imp. gal) fuel tank.
Following attachments are available for the Mahindra 6075 utility tractor:
- Mahindra 6075L loader
- Mahindra 65B backhoe
Mahindra 6075 Specifications
| General Specifications | |
| Model | Mahindra 6075 |
| Length | – |
| Width | 1,990 mm (78.3 in) |
| Height | ROPS: 2,660 mm (104.7 in) Cab: 2,990 mm (115.0 in) |
| Wheel base | 2,210 mm (87 in) |
| Weight | ROPS: 3,060 kg (6,745 lbs) Cab: 3,400 kg (7,495 lbs) |
| Fuel tank capacity | 90.0 liters (23.8 US gal.; 19.8 Imp. gal) |
| Battery | 12V |
| Cabin type | Two-post folding ROPS or Cab with air-conditioning (optional) |
| Engine | |
| Engine model | Mahindra |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 2.6 L, 2,648 cm2, (161.6 cu·in) |
| Bore and stroke | 96.0 mm X 122.0 mm (3.78 in X 4.8 in) |
| Horsepower | 71.9 PS (52.9 kW; 71.0 HP) |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | Wet disc |
| Transmission model | – |
| Transmission type | Power shuttle |
| Gears | 15 forward and 15 reverse |
| Tires | |
| Front tires | Ag: 11.2-24 Industrial: 12.5×80-18 |
| Rear tires | Ag: 16.9-30 Industrial: 19.5×24 |
| Three-Point Hitch | |
| Caterogy | II |
| Control type | Position and draft control |
| Lift capacity (at ends) | 2,199 kg (4,850 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent with electro-hydraulic wet disc clutch |
| Rear PTO speed | 540/540E rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Pump flow | 11.1 gpm (42 lpm) |
| Steering flow | 4.6 gpm (17.4 lpm) |
| Total flow | 15.7 gpm (59.4 lpm) |
I am john deere trained, but have always owned a kubota,,well now I bought a 75hp mahindra. I have had a few problems and are local dealer stepped up fixed everything perfectly under warr. but now I have bent the loader frame on a log 2ft in Dia. and 17ft long with a grapple. This is costly. Need to find a way to straighten it with out buying a new loader frame open to suggestions.. liftstation@aol.com for comments. Great tractor love it