Mahindra 6110

Mahindra 6110The Mahindra 6110 is a 4WD compact utility tractor from the 10 series. This tractor was manufactured by Mahindra in from 2011 to 2015. The Mahindra 6110 is equipped with a 2.4 L (148.6 cu·in) four-cylinder diesel engine and a partially synchronized with dry disc clutch transmission with 12 forward and 12 reverse gears.

The Mahindra 6110 compact utility tractor used the Daedong engine. It is a 2.4 L, 2,435 cm2, (148.6 cu·in) four-cylinder turbocharged diesel engine with 87.0 mm (3.43 in) of the cylinder bore and 102.0 mm (4.02 in) of the piston stroke. The compression ratio rating is 22.0:1. This engine produced 59.8 PS (44.0 kW; 59.0 HP) at 2,600 rpm of maximum output power.

The Mahindra 6110 is equipped with hydrostatic power steering, wet disc brakes, Cab with air-conditioning, and 70.0 liters (18.5 US gal.; 15.4 Imp. gal) fuel tank. This tractor could be equipped with the Mahindra ML161 loader.

Mahindra 6110 Specifications

General Specifications
Model Mahindra 6110
Length 3,580 mm (140.9 in)
Width 1,810 mm (71.3 in)
Height (Cab) 2,510 mm (98.8 in)
Wheel base
Weight 2,200 kg (4,850 lbs)
Fuel tank capacity 70.0 liters (18.5 US gal.; 15.4 Imp. gal)
Battery 12V, 80Ah
Cabin type Cab with air-conditioning
Engine
Engine model Daedong
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 2.4 L, 2,435 cm2, (148.6 cu·in)
Bore and stroke 87.0 mm X 102.0 mm (3.43 in X 4.02 in)
Compression ratio 22.0:1
Horsepower 59.8 PS (44.0 kW; 59.0 HP) at 2,600 rpm
Starter Electric
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Wet disc
Transmission model
Transmission type Partially synchronized with dry disc clutch
Gears 12 forward and 12 reverse
Tires
Front tires Ag: 9.5×20
Industrial: 10.5/80×18
Rear tires Ag: 14.9×28
Industrial: 18.4×24
Three-Point Hitch
Caterogy II
Control type Position and draft control
Lift capacity (at ends) 1599 kg (3526 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Valves 1
Pump flow 11.0 gpm (41.6 lpm)
Steering flow 5.4 gpm (20.4 lpm)
Total flow 16.4 gpm (62.1 lpm)