The Mahindra eMax 20S is a 4WD sub-compact utility tractor from the eMax S series. This tractor has been manufactured by Mahindra since 2017. The Mahindra eMax 20S is equipped with a 1.0 L (60.6 cu·in) three-cylinder diesel engine and a hydrostatic transmission with infinite (2-range) forward and reverse gears.
The Mahindra eMax 20S sub-compact utility tractor used the Yanmar 3TNV74F engine. It is a 1.0 L, 993 cm2, (60.6 cu·in) three-cylinder natural aspirated diesel engine with 74.0 mm (2.91 in) of the cylinder bore and 77.0 mm (3.03 in) of the piston stroke. This engine produced 19.7 PS (14.5 kW; 19.4 HP) at 3,000 rpm of output power.
The Mahindra eMax 20S is equipped with power steering, wet disc brakes, two-post foldable ROPS or Cab with heater (optional), and 25.0 liters (6.6 US gal.; 5.5 Imp. gal) fuel tank.
Following attachments are available for the Mahindra eMax 20S sub-compact utility tractor:
- Mid-mount Mahindra M54: 54 in (1,370 mm) mower deck with 3-blades
- Mahindra eMax 23L loader
- Mahindra eMax 26B loader
Mahindra eMax 20S Specifications
General Specifications | |
Model | Mahindra eMax 20S |
Length | 2,380 mm (93.7 in) |
Width | 1,130 mm (44.5 in) |
Height | 2,190 mm (86.2 in) |
Wheel base | – |
Ground clearance | 210 mm (8.3 in) |
Weight | 680 kg (1,499 lbs) |
Fuel tank capacity | 25.0 liters (6.6 US gal.; 5.5 Imp. gal) |
Battery | 12V, CCA 450A |
Cabin type | Two-post foldable ROPS or Cab with heater (optional) |
Engine | |
Engine model | Yanmar 3TNV74F |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 3 |
Fuel type | Diesel |
Displacement | 1.0 L, 993 cm2, (60.6 cu·in) |
Bore and stroke | 74.0 mm X 77.0 mm (2.91 in X 3.03 in) |
Horsepower | 19.7 PS (14.5 kW; 19.4 HP) at 3,000 rpm |
Starter | Electric |
Transmission and chassis | |
Chassis | 4×4 MFWD 4WD |
Steering type | Power |
Brakes | Wet disc |
Transmission model | – |
Transmission type | Hydrostatic |
Gears | Infinite (2-range) forward and reverse |
Tires | |
Front tires | Lawn/turf: 18×8.5-10 |
Rear tires | Lawn/turf: 26×12-12 |
Three-Point Hitch | |
Caterogy | IN |
Control type | – |
Lift capacity (at ends) | 498 kg (1098 lbs) |
PTO (Power take-off shaft) | |
Middle PTO type | – |
Middle PTO speed | 2,500 rpm |
Rear PTO type | Independent |
Rear PTO speed | 540 rpm |
Hydraulic system | |
Hydraulic type | Open center |
Valves | 1 |
Steering flow | 2.11 gpm (8 lpm) |
Total flow | 6.97 gpm (26.4 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment