Massey Ferguson 360 utility tractor: review and specs

The Massey Ferguson 360 is a 2WD/4WD utility tractor from the 300 series. This tractor was manufactured by Massey Ferguson in Coventry, England from 1987 to 1991. The MF 360 is equipped with a 2.5 L (152.0 cu·in) three-cylinder diesel engine and one of three transmissions: a gear type transmission with 8 forward and 2 reverse gears, a mechanical shuttle transmission with 6 forward and 2 reverse gears or a synchromesh transmission with 12 forward and 4 reverse gears.

The Massey Ferguson 360 utility tractor used the Perkins AT3.152 engine. It is a 2.5 L, 2,491 cm², (152.0 cu·in) three-cylinder turbocharged diesel engine with 91.0 mm (3.58 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 60.8 PS (44.7 kW; 60.0 HP) at 2,200 rpm of output power.

The MF 360 is equipped with hydrostatic power steering, differential wet disc brakes, two-post ROPS, and 68.1 liters (18 US gal.; 15 Imp. gal) fuel tank.

Following attachments are available for the Massey Ferguson 360 utility tractor:

Massey Ferguson 232 loader – for 2WD
Massey Ferguson 236 loader – for 2WD
Massey Ferguson 832 loader – for 4WD

Massey Ferguson 360 Specifications

General Specifications
Model	Massey Ferguson 360
Length	2WD: 3,340 mm (131.5 in) 4WD: 3,580 mm (140.9 in)
Width	1,870 mm (73.6 in)
Height	2WD: 2,390 mm (94.1 in) 4WD: 2,380 mm (93.7 in)
Wheel base	2WD: 1,930 mm (76 in) 4WD: 2,110 mm (83.1 in)
Ground clearance	2WD: 240 mm (9.4 in) 4WD: 260 mm (10.2 in)
Weight	2WD: 2,230 kg (4,916 lbs) 4WD: 2,425 kg (5,346 lbs)
Fuel tank capacity	68.1 liters (18 US gal.; 15 Imp. gal)
Battery	12V
Cabin type	Two-post ROPS
Engine
Engine model	Perkins AT3.152.4
Engine type	Four-stroke, liquid-cooled, inline
Cylinders	3
Fuel type	Diesel
Displacement	2.5 L, 2,491 cm², (152.0 cu·in)
Bore and stroke	91.0 mm X 127.0 mm (3.58 in X 5 in)
Horsepower	60.8 PS (44.7 kW; 60.0 HP) at 2,200 rpm
Starter	Electric

Transmission and chassis
Chassis	4×2 2WD or 4×4 MFWD 4WD
Steering type	Hydrostatic power
Brakes	Differential wet disc
Transmission model	–
Transmission type	Gear type
Gears	8 forward and 2 reverse
Transmission model	–
Transmission type	Mechanical shuttle
Gears	6 forward and 2 reverse
Transmission model	–
Transmission type	Synchromesh
Gears	12 forward and 4 reverse
Tires
Front tires	Ag: 6.00-16 (2WD), 8.30-24 (4WD)
Rear tires	Ag: 13.6-28

Three-Point Hitch
Category	II/I
Control type	Position and draft control
Lift capacity (at ends)	1,760 kg (3,890 lbs)
PTO (Power take-off shaft)
Rear PTO type	Live with two-stage clutch or independent (optional for 4WD)
Rear PTO speed	540 rpm
Hydraulic system
Hydraulic type	Open center
Hydraulic capacity	43.5 L (11.5 US. gal, 9.6 Imp. gal.)
Pressure	3000 psi (206.8 bar)
Valves	1
Pump flow	4.5 gpm (17.0 lpm) 3-point: 9.2 gpm (34.8 lpm)
Total flow	13.7 gpm (51.9 lpm)

ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.