Massey Ferguson 3625

Massey Ferguson 3625The Massey Ferguson 3625 is a 2WD/4WD utility tractor from the 3600 series. This tractor was manufactured by Agritalia for distributor Massey Ferguson in Rovigo, Italy from 2007 to 2012. The Massey Ferguson 3625 is equipped with a 3.3 L (201.0 cu·in) three-cylinder diesel engine and one of four transmissions model.

The Massey Ferguson 3625 utility tractor used the AGCO SisuDiesel 33 DT engine. It is a 3.3 L, 3,293 cm2, (201.0 cu·in) three-cylinder turbocharged intercooled diesel engine with 108.0 mm (4.25 in) of the cylinder bore and 120.0 mm (4.72 in) of the piston stroke. This engine produced 69.0 PS (50.7 kW; 68.0 HP) at 2,200 rpm of output power.

The MF 3625 is equipped with power steering, hydraulic wet disc brakes, a two-post foldable ROPS or Cab with heater (optional), and 82.9 liters (21.9 US gal.; 18.2 Imp. gal)
fuel tank for ROPS version or 107.9 liters (28.5 US gal, 23.7 Imp. gal) for Cab version.

Massey Ferguson 3625 variants:

  • 3625: standard tractor
  • 3625 F: flex version, narrow
  • 3625 S: special version, extra narrow
  • 3625 V: vineyard version, ultra-narrow
  • 3625 GE: ground effect version, low profile

Massey Ferguson 3625 Specifications

General Specifications
Model Massey Ferguson 3625
Length 3,750 mm (147.6 in)
Width 1,930 mm (76 in)
Height ROPS: 2,510 mm (98.8 in)
Cab: 2,560 mm (100.8 in)
Wheel base 2,070 mm (81.5 in)
Weight (shipping) 2WD ROPS: 2,300 kg (5,070 lbs)
2WD Cab: 2,800 kg (6,175 lbs)
4WD ROPS: 2,500 kg (5,510 lbs)
4WD Cab: 3,200 kg (7,060 lbs)
Fuel tank capacity ROPS: 82.9 liters (21.9 US gal.; 18.2 Imp. gal)
Cab: 107.9 liters (28.5 US gal.; 23.7 Imp. gal)
Battery 12V, CCA 775A
Cabin type Two-post foldable ROPS or Cab with heater (optional)
Engine model AGCO SisuDiesel 33 DT
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 3.3 L, 3,293 cm2, (201.0 cu·in)
Bore and stroke 108.0 mm X 120.0 mm (4.25 in X 4.72 in)
Horsepower 69 PS (50.7 kW; 68 HP) at 2,200 rpm
Starter Electric
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power
Brakes Hydraulic wet disc
Final drive Inboard planetary
Differential lock Electro-hydraulic rear
Transmission model SynchroShuttle
Transmission type
Gears 8 forward and 8 reverse
Transmission model PowerShuttle
Transmission type Synchronized shuttle
Gears 12 forward and 12 reverse
Transmission model PowerShuttle
Transmission type Power shuttle
Gears 24 forward and 24 reverse
Transmission model SpeedShift
Transmission type Synchronized shuttle with partial power shift
Gears 24 forward and 24 reverse
Front tires Ag: 7.50-16 (2WD), 11.2R24 (4WD)
Rear tires Ag: 16.9R30
Three-Point Hitch
Category II/I
Control type
Lift capacity (at ends) 2,500 kg (5,513 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent with electro-hydraulic wet disc clutch
Rear PTO speed 540,
540/540E (optional),
540/1000 (optional),
ground (optional)
Hydraulic system
Hydraulic type Open center
Pressure 2756 psi (190 bar)
Valves Rear: 1 to 3,
Mid: 2 (optional
Pump flow 15.8 gpm (59.8 lpm)
Steering flow 6.6 gpm (25 lpm)
Total flow 22.4 gpm (84.8 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.