Wheel Horse 417-A

Wheel Horse 417-AThe Wheel Horse 417-A is a 2WD garden tractor from the 400 series. This tractor was manufactured by Wheel Horse in South Bend, Indiana, USA from 1985 to 1986. The Wheel Horse 417-A is equipped with a 0.7 L (42.2 cu·in) two-cylinder gasoline engine and a belt-driven hydrostatic transmission with infinite forward and reverse gears.

The Wheel Horse 417A garden tractor used the Kohler KT17QS engine. It is a 0.7 L, 691 cm2, (42.2 cu·in) two-cylinder natural aspirated gasoline engine with 79.0 mm (3.11 in) of the cylinder bore and 70.0 mm (2.76 in) of the piston stroke. This engine produced 17.3 PS (12.7 kW; 17.0 HP) at 3,600 rpm of output power.

The Wheel Horse 417-A is equipped with manual steering, an open operator station, and 11.4 liters (3 US gal.; 2.5 Imp. gal) fuel tank.

Following attachments are available for the Wheel Horse 417-A garden tractor:

  • Mid-mount Wheel Horse 910 mm (36 in) mower deck
  • Mid-mount Wheel Horse 1,060 mm (42 in) mower deck
  • Mid-mount Wheel Horse 1,210 mm (48 in) mower deck

Wheel Horse 417-A Specifications

General Specifications
ModelWheel Horse 417A
Length1,650 mm (65 in)
Width960 mm (37.8 in)
Height1,050 mm (41.3 in)
Wheel base1,150 mm (45.3 in)
Weight287 kg (633 lbs)
Fuel tank capacity11.4 liters (3 US gal.; 2.5 Imp. gal)
Battery12V
Cabin typeOpen operator station
Engine
Engine modelKohler KT17QS
Engine typeFour-stroke, air-cooled
Cylinders2
Fuel typeGasoline
Displacement0.7 L, 691 cm2, (42.2 cu·in)
Bore and stroke79.0 mm X 70.0 mm (3.11 in X 2.76 in)
Horsepower17.3 PS (12.7 kW; 17.0 HP) at 3,600 rpm
StarterElectric
Transmission and chassis
Chassis4×2 2WD
Steering typeManual
Brakes
Transmission modelEaton 1100
Transmission typeBelt-driven hydrostatic
GearsInfinite forward and reverse
Speed Forward: 11.3 kmh (7 mph) Reverse: 7.2 kmh (4.5 mph)
Tires
Front tires Lawn/turf: 15×6.00-6
Rear tires Lawn/turf: 22×7.50-12
Three-Point Hitch
CategorySleeve hitch
Control type
Lift capacity (at ends)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

1 Comment

Leave a Reply

Your email address will not be published.


*