The John Deere 2040 is a 2WD or 4WD utility tractor manufactured by John Deere in Mannheim, Baden-Württemberg, Germany from 1979 to 1987 for European-market. This tractor was not related to the earlier US-market JD 2040, being closer to the John Deere 50-series tractors. The John Deere 2040 is equipped with a 3.9 L (239.2 cu·in) four-cylinder diesel engine and a partially synchronized transmission with 8 forward and 4 reverse gears.
The John Deere 2040 utility tractor used the John Deere engine. It is a 3.9 L, 3,920 cm2, (239.2 cu·in) four-cylinder natural aspirated diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 16.8:1. This engine produced 71 PS (52.2 kW; 70.0 HP) at 2,500 rpm of output power.
The JD 2040 is equipped with power steering, hydraulic disc brakes, an open operator station or cab (optional) and 95.0 liters (25.1 US gal.; 20.9 Imp. gal) fuel tank.
John Deere 2040 Specifications
| General Specifications | |
| Model | John Deere 2040 |
| Length |
2WD: 3,730 mm (146.9 in) 4WD: 3,920 mm (154.3 in) |
| Width | 2,070 mm (81.5 in) |
| Height |
Cab: 2,650 mm (104.3 in) Exhaust: 2,920 mm (115 in) |
| Wheel base |
2WD: 2,270 mm (89.4 in) 4WD: 2,280 mm (89.8 in) |
| Weight |
2WD: 2,965 kg (6,537 lbs) 4WD: 3,305 kg (7,286 lbs) |
| Fuel tank capacity | 95.0 liters (25.1 US gal.; 20.9 Imp. gal) |
| Battery | 12V, 55 Ah |
| Cabin type | Open operator station or Cab (optional) |
| Engine | |
| Engine model | John Deere |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Diesel |
| Displacement | 3.9 L, 3,920 cm2, (239.2 cu·in) |
| Bore and stroke | 106.0 mm X 110.0 mm (4.17 in X 4.33 in) |
| Compression ratio | 16.8:1 |
| Horsepower | 71 PS (52.2 kW; 70.0 HP) at 2,500 rpm |
| Starter | Electric |
| Oil capacity: | 8.5 L (9 US. qt, 7.5 Imp. qt.) |
| Coolant capacity: | 18.0 L (19 US. qt, 15.8 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | Hydraulic disc |
| Transmission model | – |
| Transmission type | Partially synchronized |
| Gears | 8 forward and 4 reverse |
| Speed | Forward: 30.4 kmh (18.9 mph) Reverse: 13.6 kmh (8.5 mph) |
| Transmission oil capacity | 55.0 L (14.5 US. gal, 12.1 Imp. gal.) |
| Tires | |
| Front tires | Ag: 7.50-18 (2WD), 11.2-28 (4WD) |
| Rear tires | Ag: 13.6/12-38 |
| Three-Point Hitch | |
| Category | II |
| Control type | – |
| Lift capacity | 3,070 kg (6,770 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent with hydraulic clutch |
| Rear PTO speed | 540, 1000 (optional) rpm |
| Hydraulic system | |
| Hydraulic type | Closed center |
| Hydraulic capacity | 55.0 L (14.5 US. gal, 12.1 Imp. gal.) |
| Pressure | 2466 psi (170 bar) |
| Pump flow | 12.42 gpm (47 lpm) |
Be the first to comment